Adhesive, Packaging and Label Testing Instruments

Product Details:

Features:

• Speed range 6 to 1200 i/m (15 to 3048 cm/m
• 90 to 180 degree test angle
• Available load cell sizes 2, 5, 10, & 25 lb (1, 2.2, 4.5, & 11.2 Kg)
• EZ-Lab compatible
• Available 120 or 240 vac

Additional Information:

• Item Code: AR-1000

Product Details:

Chem instruments Peel Adhesion Tester Model : PA-1000-90 runs at varying speeds for added flexibility. These have inclusive features such as robust construction and is can withstand drastic environmental conditions.

Product Details:

Cheminstruments 180° Peel Adhesion : For added testing flexibility, the ChemInstruments 180° peel adhesive testing machine can perform a precision 180° peel test at three different speeds. The 180° peel adhesive tester offers a number of robust features.

Product Details:

Features:

• Designed to perform ASTM D3121, PSTC 6 and other rolling ball test
• Includes standard 7/16” (11 mm) stainless steel ball
• Optional size balls available.

Product Details:

"HAL" USA Dust Particle Counter - 3 channel - HPC 300
HPC300 Handheld Laser Particle Counters measure particle suspended in the air in real time with applications such as microelectronics, fine mechanics, optics, pharmaceutical, medical device, food processing, and aerospace. I t is also widely used for indoor/outdoor air quality (IAQ) application. The basic operating principle of the HAL-HPC300 is that pulse signals generated from laser light scattering off aerosol particles are processed and counted, based on digital signal processing.

Product Details:

The Hot Melt Laboratory Coater / Laminator is a precision laboratory bench top hot melt coating and laminating system capable of producing coated and laminated samples of hot melt adhesives on foils, films, papers and other web based materials. Lab scale simulations of production processes can be easily set up and studied. The ability of setting a specific gap and then being able to change the pull speed with the laminator allows you to dial in a specific coat weight. This feature benefits the development of hot melt adhesive systems for future production.

• Rugged construction, capable of withstanding the abuse of the production environment
• Aluminum frame, hard coat anodized and Teflon coated
• Precision ground, 303 stainless steel coating bars for highly accurate cross web coating
• Set the gap quickly with two feeler gauge sets, included with the machine
• Reservoir capacity up to 125 mL
• Reservoir is capable of maintaining temperatures up to 400°F (204°C)
• Coating range capable of producing 25 gsm to 1,500 gsm samples
• Produce samples of unlimited length from 3" (7 cm) to 12" (30 cm) in width
• 500-watt heating rods provide heating capacity to the reservoir and two coating bars
• J-type thermocouple is an integral part of each heating rod
• Reservoir and coating bar temperatures are accurately maintained by individual digital PID controllers
• Temperature controllers, heating elements and electronics are housed in a separate steel enclosure
• Heating elements connect to the control box with individual 36" (1 m) stainless steel armored cables
• Controllers are capable of maintaining temperatures to a tolerance of +/- 2°F (1°C)
• Quickly disassembles with a minimum of parts for easy cleaning *Unwind stands are capable of holding roll stock up to 12" (30 cm) diameter by 12" wide (30 cm)
• Steel base assembly firmly supports the coating head and unwind stand
• Adjustable Teflon side dams allow for coating control from 1/2" to 12" in width
• Friction type brake unwinds on both liner and face material
• Simple pivot mechanism on unwinds allow for basic web alignment
• Top and bottom laminator rolls are 2" (5 cm) diameter by 24" (61 cm) face width
• Top and bottom laminator rolls have a steel core and are covered with 80 durometer silicone rubber
• Bottom laminator roll is driven, top roll idles
• Requires compressed air - max pressure 90 PSI (6 bar)
• Air pressure is adjustable for differing levels of laminating pressure
• Laminating pressure (LP) can be approximated using the following formula: LP = (3.4 x line pressure) / sample width Flow controls are included on both laminator cylinders to allow for smooth, safe operation
• Safety features include appropriate guarding and an emergency stop switch
• Length of lamination can be measured
• Digital controls to control speed, unit of measure and jog functions
• Variable speed motor allows laminating speeds from 1.0-12.5 fpm (30-375 cm/m)
• Standard input voltage - 120 VAC (50/60hz)

Accessories:

• Manual windup station
• Laminator gap adjustment
• Bull nose coating bar
• Wire wound coating bars (Mayer)
• Pattern coating inserts
• Release paper (roll)
• Polyester (roll)

Additional Information:

• Item Code: HLC-101

Product Details:

CHEM INSTRUMENTS Variable Speed Wire Rod Draw down Coater EC-200 :

• A fixed speed coater with 7.5” (16 cm) by 12” (30 cm) coating area
• Accepts coating rods 3/8” (9.5 mm) diameter by 12” (305 mm) long
• Coating load weight is 600 grams
• Operates on 120 or 240 VAC

Additional Information:

• Item Code: EC-200

Product Details:

"EUCLID" Excellent for performing tests onto small samples, hand sheets, and can also be used for continuous web coating. Can also be used to perform saturations and 2 roll pressure tests.