Measuring Testing Instruments

Product Details:

Paper Moisture Meter is an electrical resistance-type moisture meter, utilizing the relationship between moisture content and electrical resistance. The contact pins mounted on the top of the meter are used for making direct contact with the material. Various external electrodes are also available for specific applications. The P-2000 is especially useful for testing paperboard, corrugated stock, and paper tubes. It is ideal for plant superintendents, inspectors, buyers and salespeople.

 

Product Details:

Walk in dust-proof test chamber provide a simulated sand blowing and dusting environment. It can continuous operation for a long time without failure

Product Details:

The simplest method of applying flexo inks and other fluid coatings onto any substrate to produce accurate and
repeatable proofs that closely resemble conventional flexo printing. The K Lox Proofer is an essential tool for ink makers
and printers alike. Ideal for quality control and presentation samples, R&D and computer colour matching data.

MAIN FEATURES
Instant flexo proofs.
Easy to use – easy to clean.
Excellent repeatability.
Reduces press down-time.
Fully interchangeable rollers up to 500 screen.
Hand and automatic versions available
K LOX
A bead of ink is placed between an engraved anilox roller and a rubber roller as illustrated below. It is essential to
have constant pressure between the rollers for consistent prints and this is ensured by two weights. When the K Lox
is drawn smoothly over the substrate an accurate film of ink is printed producing a sample up to 4.5” (115mm)
wide. After removing the weights, both rollers are easily cleaned. Anilox rollers with screens for solid, line and halftone printing may be selected as required.

HAND K LOX
The Hand K Lox provides a cost effective and simple means of proofing flexo inks. It is available as a single unit or may
be ordered as a comprehensive system. The Hand K Lox complete system comes with 3 standard engraved anilox rollers, 2 rubber rollers and a cleaning storage rack.

AUTOMATIC K LOX
With a little practice, the K Lox user is able to produce consistent results with the hand unit. However, where a
number of operators may be involved or when the highest degree of repeatability is demanded (e.g. when using the
prints for computer colour matching), the Automatic K Lox is recommended. This machine eliminates any variation in
speed and pressure and an accurate print is produced every time. The unit operates at variable speeds up to
15m/min. An air driven version is available for use in hazardous areas.

Product Details:

Product Details:

• Combines HLC-101 coater with LL- 100A laminator
• Includes brake unwinds & manual edge guide system
• 3 separate heat controllers

Additional Information:

• Item Code: HLCL-1000

Product Details:

Erichsen Tensile Testing Machines is designed to facilitate goods acceptance inspections and quality checks in a simple and fast manner. Further, these are widely used for in-process controls as well as for tensile and pressure tests. Our entire range is in conformance with the current standards for tensile testing machines and further, meets the requirements of CE qualification.

 

Product Details:

The respiratory resistance tester is suitable for determining the inhalation resistance and exhalation resistance of respirators and mask protective products under specified conditions, and for the related testing and inspection of common mask products by manufacturers of national labor protection article inspection agencies.

Product Details:

Product Details:

• Performs standard probe tack test
• EZ-Lab compatible

Additional Information:

• Item Code: PT-1000

Product Details:

Ideal for universal tensile tests, the ChemInstruments Tensile Tester is a versatile machine that provides powerful test performance for a variety of materials. It is designed to meet the test method requirements of PSTC, ASTM, TLMI and more.

The compact, single screw Tensile Tester offers a range of capabilities that includes: Tensile, Elongation, Modulus, Lap shear, Peel (180° and 90°), Unwind and Tack.

Product Details:

This Battery Crush Nail Penetration Tester is used to simulate the battery penetration test of a sharp object during packaging, transportation, storage, use and disposal.

Product Details:

To test the tensile strength, peeling strength, heat sealing strength,tearing strength, piercing strength of plastic film, composite film, tape, soft packaging material, rubber sheets, paper, non-woven fabrics and other packaging materials, widely used in industries of plastic films, food, pharmaceuticals, inspection agency, research institute, college and so on.

Product Details:

We deal with a different kind of Resistance Tester.

Product Details:

We deal with Tensile Testing Machine.

Product Details:

Application: Battery Module / Battery Pack / Battery System crush test, penetration test.

Drive Mode: Electro-hydraulic Servo

Crush Tool: Semi-cylinder, hemisphere (According to test standard)

Product Details:

Relevant standards requirement:Temperature shock

1. Test Object: Battery storage pack or system.
2. Li-ion battery pack or system placed in (-40±2)~(85±2) alternation temperature, the conversion time of two extreme temperatures is less than 30 minutes. Place the test objects into each extreme temperature keep 8h, test 5 cycles.
3. Observe for 2 hours under the room temperature after testing,

Humidity & Temperature Cycling

1. Test Object: Battery storage pack or system.
2. Refer the GB/T2423.4 Test Db, variable refer the Graph 4,the highest temperature is +80,5 cycles. Observe for 2h under the room temperature.

Product Details:

The external fire exposure test machine is applicable to the standard UL 2580.

Product Details:

Relative Standard test requirements

1. Test Object: battery pack and system
2. Test Conditions: Altitude 4000m or the equate air pressure condition, atroom temperature.
3. The test objects stay in the test condition as Item 2 for 5 hours.
4. Subject the test object to 1C(no more than 400A) constant current discharge until reaching the cutoff condition.
5. After testing, observe for 2h under the room temperature.

Product Details:

Relevant standards requirement:

1. Test Object: Battery storage pack or system.
2. The test object connects all the wiring harness, connector and other parts according to the whole vehicle connection mode. Select one of the following two methods to operate test at the room temperature.

• Immerse the test objects (in the direction of real vehicle assembling) into 3.5% NaCl solution (mass fraction, simulated under normal temperature water composition) for 2 hours. The water depth is to be sufficient to completely submerge the test objects.
• Test objects according to GB/T4208-2017 part 14.2.7 test method and test process.

Product Details:

We deal with a Rubber Testing Equipment.

Product Details:

We deal with a Moisture Balances.

Product Details:

HalTech’s HCO107 Carbon Monoxide Meter makes it easy to take quick measurements of low CO levels. Featuring the newest generation of electrochemical sensors, the HCO107 is a point-to-sample instrument and responds very quickly to ambient changes in CO concentration with a built-in pump. The special circuitry design allows for no drift and accurate measurements.

Product Description
Wide measuring range
Built-in pump for fast response
Direct real time digital reading
Manual and auto data save
High-speed USB data downloading
No warm-up time
Auto backlight
Simple and easy for self-calibration
Audible excess limit warning
External temperature and humidity sensors
Rechargeable Li-ion battery
MADE IN USA

Product Details:

The temperature control battery short circuit test chamber is designed to comply with the standard. According to the short-circuit test requirement, the short-circuit must be less than 5 mΩ to achieve maximum current.

Product Details:

The battery crush nail penetration tester is used to simulate the use, transportation, storage and disposal of various types of batteries under certain temperature conditions, when the battery is crushed (such as compacted garbage) or nail penetration, and to judge the battery safety performance. The battery is qualified as no disintegration, no rupture, and no fire.

Product Details:

Product Details:

• Battery power timers
• Timers increment in tenths of minutes
• Suitable for 400°F (204°C)
• Height extensions available

Additional Information:

• Item Code: HT-8

Product Details:

Product Details:

• Performs standard loop tack test
• Removable sample clamp
• Retains up to 20 test onboard
• EZ-Lab compatible

Additional Information:

• Item Code: LT-1000

Product Details:

Specifications:

• Jog or continuous operating mode
• 80 Durometer silicone rubber covered steel rolls
• Versatile forward and reverse controls

Additional Information:

• Item Code: LL-100

Product Details:

Product Details:

• Hook brass calibration weights
• Optional NIST traceable certificate

Product Details:

Wahl originated the digital portable infrared thermometer known as the Heat Spy®, and the portable Platinum-RTD thermometer known as the Heat Prober® These digital meters incorporates state-of-the-art microprocessor technology and use a wide selection of interchangeable plug in probes.

Product Details:

Specifications:

• Precision ground stainless steel coating bars for even cross web coating weight
• 125 gram reservoir
• Dial indicators for setting coating gap

Additional Information:

• Item Code: LC-100

Product Details:

Bell's Double-deck High Temperature Aging Test Chamber is widely used for the aging test for electronic products, solar panel, plastic products, especially for battery temperature aging test.

Product Details:

Thermal abuse test chamber protect for short circuit caused by incorrect operation of the operator and battery electrode, battery positive and negative connection, etc

Product Details:

Bells shock test System used to measure and determine the impact resistance of a product or package. It is mainly used to evaluate the reliability of the function and the integrity of the structure of the test product under an impact environment. Suitable for impact testing of aerospace, aerospace, marine, military, consumer electronics, automotive, household appliances and display equipment.

 

Product Details:

The Vibration Test System is a simulation of the various environments encountered in the manufacturing, assembly, transportation and use phases of execution. It is primarily used to identify the ability of a product to withstand environmental vibrations.

Product Details:

Thermal runaway test machine test the whole vehicle or the complete vehicle-borne ion battery system or the subsystem of vehicle-borne lithium-ion battery system, including a lithium ion battery and an electrically connected lithium ion battery. The applicable standard is UL 2580, IEC 62619.

Product Details:

This Walk in Explosion-proof Chamber is mainly used to test the safety performance of lithium ion battery, battery pack. Prevent test operators and other test equipment from being burned and exploding. At the same time, the explosion-proof test chamber with the smoke exhaust system can discharge the smoke generated in the test to the outside.

Product Details:

We deal with Automatic Weighing Machines.

Product Details:

We deals in different kind of Surface Inspection System.

Product Details:

Thermal abuse test chamber is suitable for standard IEC 62133-2017, UL 1642 and GB 31241-2014.

Product Details:

Test requirements

• IEC 62133-2017

Product Details:

High quality proofs using gravure, gravure-offset or flexo inks are produced instantly using the K Printing Proofer. Featuring electronically engraved printing plates and variable printing speeds of up to 40m/min, this is an essential tool for all those involved in the manufacturing or use of liquid inks. Ideal for R&D and computer colour matching data, quality control and presentation samples. The K Printing Proofer is very easy to clean and all parts are solvent resistant.

MAIN FEATURES
Almost any flexible substrate can be printed or laminated
Excellent printability ensured by micrometer control
Multiple ink samples may be printed simultaneously
for comparison purposes
High printing speeds enable use of inks nearing press viscosity
Easy to operate with a footprint of just 400 x 500mm

GRAVURE
Ink is transferred from an electronically engraved printing plate directly onto the substrate, which is attached to the rubber impression roller. Doctor blade and roller adjustments are made via micrometers allowing repeatable settings for future tests.

FLEXO
Using the flexo head, ink is transferred from the printing plate to a plain stereo roller and then onto the substrate. Adjustments are again made by micrometers. Plain or step wedge plates are available corresponding to the various densities required for flexo printing.

GRAVURE OFFSET
The flexo head is employed and fitted with a plain rubber roller to transfer ink from the plate to the substrate. A machine supplied with the flexo head can therefore be used for both techniques with the possible addition of an alternative stereo/offset roller and printing plate if required.

LAMINATING
Both wet and dry laminated samples can be produced on the machine using the gravure head with K-Lam laminating accessories. This includes
a rubber covered bed using a K-Lam bar to apply adhesive. Adhesive is applied in front of the bar and the machine then coats and laminates in one operation.
Dry laminating is carried out in two phases. The adhesive is coated onto one substrate and after evaporation of the solvent, the second substrate is subsequently laminated to it

CLEANING
The essential job of cleaning various machine components following each proofing run has been simplified by careful design. The illustration (left) shows the machine fitted with a gravure head pivoted back to the cleaning position. It can be seen that the printing plate, rollers and doctor blade are all exposed and easily accessible.

PRINTING PLATES
Printing plates for use with the Printing Proofer are electronically engraved in exactly the same way as
production cylinders. A choice of one or more of the standard plates available will normally be
satisfactory but special plates including those with a logo and/or company details can be supplied.

Maximum engraving areas:-
Standard Plates: Flexo 150 x 95 mm
Gravure 160 x 95mm

Special Design plates: Flexo 150 x 95 mm
Gravure 180 x 110 mm

The illustration shows a typical plate together
with various proofs obtained with standard
plates, details of which are as follows:
A. Solid Area Plate
(KPP.10) 100 lines/inch (40 lines/cm) Density: 100%
(KPP.11) 150 lines/inch (60 lines/cm) Density: 100%
(KPP.12) 200 lines/inch (80 lines/cm) Density: 60%

B. Single 3 Wedge Plate
(KPP.13) 150 lines/inch (60 lines/cm)
Densities: 100-80-60%
Please note the proof shown has a typical company
logo and address added.

C. 1 + 4 Wedge Plate
(KPP.14) 150 lines/inch (60 lines/cm)
Densities: half area 90% and adjacent step wedges
100-90-80-70%