New Items

Product Details:

The F-2000 is great for hay producers looking to enhance quality control. The F-2000 checks hay moisture in the windrow or in bales, and comes with the same accuracy and clarity as the FX-2000!

Product Details:

This state-of-the-art meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the FX-2000 gives clear, accurate moisture readings every step of the way!

Features:
• Micro controller circuit 
• Can be used for on-the-go moisture monitoring or as a portable meter 
• In continuous mode: 
o Takes two readings every second 
o Displays the average and highest of eight accumulated readings 
o Readings updated every 4 seconds 
o Back lighted display 
• In portable mode: 
o Averages up to 100 accumulated readings 
o Displays average and highest of accumulated readings 
• Measures moisture content over the range of 6%-40% 
• Three-year warranty 
• Ideal for high volume producers who need the time-saving convenience of on-the-go monitori

Product Details:

Modified specifically for tobacco growers, the F-2000T shares many of its features with the F-2000 hay meter. Calibrated for Burley tobacco, the F-2000T is just what you need to produce a high-quality crop every time.

Product Details:

Ultrasonic Thickness Gages Measures Wall Thickness

Measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating.
Precision ultrasonic transducers provide fast, accurate readings Solvent, acid, oil, water, and dust resistant – weatherproof

Pre-programmed velocities – Simply select from a list of common materials or enter your own with ease
Min Scan - Measurement rate of up to 20 readings per second with onscreen min and max for quick inspection over a large area

PosiTector interchangeable platform – attach any PosiTector probe to a single gage body
USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
Conforms to ASTM E797

Product Details:

For flooring contractors, woodworkers, furniture manufacturers, QC inspectors and small mills, the J-2000 helps to keep up with ever-changing job conditions. With built-in wood species correction and temperature correction, along with storage and informative reading statistics the J-2000 is an extremely versatile tool at a great value.

Product Details:

Given the challenging conditions of building inspection, installation, and drying jobs, it pays to have an easy-to-use moisture meter that you can depend on. The easy-to-use 2-in-1 TechCheck PLUS was designed with simplicity in mind and helps to make even the most demanding job simple. The newly updated TechCheck PLUS has all the great features you've come to expect, along with some new ones.

Product Details:

The RDM-3 is a handheld moisture meter packed with features, and is perfect for the lumber and woodworking industries. The RDM-3 is ideal for anyone who needs to collect and analyze key statistical information.

Product Details:

Replica Tape Reader to Measure and Record 2D/3D Surface Profile Parameters
Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film™ replica tape.
Create a replica by burnishing tape on a surface and insert into instrument. 3D imagery and 2D/3D parameters are displayed in seconds!
Reports common parameters: Ra, Rq, Rz, Rp, ­Rv, Rt, Rpc (2D), and Sa, Sq, Sz, Sp, Sv, and Spd (3D)
Ideal for field or laboratory use; flat, curved or irregular surfaces Certified and traceable to an accredited national laboratory
Download 3D .SDF image files for analysis in included PosiSoft or third party ­­­software
Certificate of Calibration showing traceability to PTB (for H and HL only) and NPL (for Ra and Rt) included (Long Form)
Conforms to ASME B46, ASTM D4417, ISO 8503-5, NACE SP287, SSPC-PA 17, SSPC-SP5, SP6, SP10, SP11-87T and others

Product Details:

With simplified controls, the F-6/6-30 is a great entry-level meter for value-minded hay producers. It is also a favorite among those serving the export markets that require lower MC range readings.

Product Details:

The TABER® Reciprocating Abraser (Abrader) - Model 5900 is a test apparatus similar to the instrument described in test method ISO 1518. Ideal for flat surfaces, this tester can be configured with optional attachments to evaluate the relative resistance or susceptibility of a material surface to physical damage such as wear and abrasion, rub, scratch, mar, gouge, scrape, plus others.

The Taber Reciprocating Abraser includes a counterbalanced arm which pivots on an adjustable height gantry system. The counterweight allows the user to balance the test arm, ensuring precise test load set-up regardless of the weight of the attachment. Incorporated at the end of the arm is a tool holder to which optional attachments and weights may be secured. A sliding specimen platform moves in a horizontal, reciprocating motion under the stationary tool holder.

Test parameters such as stroke length (6 - 155mm), speed (3 - 75 cycles per minute) and load (1N - 24N maximum, with included weights of 1N, 2N, 2.5N, 5N, 10N & 24N) are adjustable so optimal settings for each material can be established.

To expand test loads, optional auxiliary weights are sold individually and available as 50g, 100g, 150g, 200g, 500g, 1000g, 2000g, 2400g and 5000g. In addition, an optional weight support may be affixed to the top of the tool holder. This permits using auxiliary weight discs originally intended for Taber''s Linear Abraser 5750 (10g, 20g, 50g, 75g, 100g, 150g or 250g).

Taber Reciprocating Abraser (Abrader) 5900
The Wearaser® collet assembly comes standard with each Taber Reciprocating Abraser, along with CS-10 and H-18 Wearaser abradants. The size and shape of a pencil eraser, the Wearaser is made using the same high quality Taber abrasive media found in our Genuine Taber abrading wheels. This permits the use of equivalent abrasive materials with the Reciprocating Abraser as well as Taber''s Linear Abraser and the Taber Rotary Platform Abraser.

The standard specimen table provided with the Reciprocating Abraser is 216mm x 278mm (8.5" x 11") with drilled tapped holes to accommodate specimen clamps or optional specimen fixing plates. To evaluate most flat specimens, specimen clamps or the optional Wide Slot Fixing Plate may be suitable. For flexible materials such as textile products, the optional Specimen Fixing Plate Kit might be used. Products with a slight contour can also be secured in place using the specimen clamps provided or a custom fixture.

The Reciprocating Abraser can accommodate two additional test arm kits (sold separately), permitting up to three tests to be performed simultaneously.

Additional Information:

• Item Code: 5900

Product Details:

The TQC Automatic Cupping Tester allows to perform a cupping (Erichsen / Dent) test on coated steel panels to define the resistance of paint, varnish or related products to cracking and/or detachment from a metal substrate when subjected to gradual deformation by indentation under standard conditions.

The test is either used as a “pass / fail” test by testing to a specified depth or defining the minimum depth at which a coating fails by gradually increasing the indentation.

The ISO 1520 standard requires panels to be slowly deformed at a steady rate between 0,1 mm/s and 0,3 mm/s without interruption. Especially with thicker steel panels hand-operated testers not always allow an uninterrupted deformation.

The TQC Automatic Cupping Tester is driven by a micro-step controlled electro motor which allows precise and steady deformation with 0,01 mm steps. Operation is intuitive by means of a jog-dial switch and a multi-lingual operating menu on a large illuminated display.

An integrated LED powered sample illumination system comforts examining the coating under test. To guarantee maximum visibility of all possible types of surface including high gloss, matte or colored samples the angle of the LED light can be set. Choose light from just one or all directions. The strength of the LED’s is adjustable but also the colors can be changed to achieve maximum contrast.

Mandatory test in Qualicoat and QIB accredited laboratories.

Product Details:

The TABER® Linear Abraser (Abrader) - Model 5750 has been engineered to test either contoured or flat surfaces, making it ideal to evaluate finished products of all sizes. To expand the versatility of this instrument, the Linear Abraser can be configured with optional test attachments to perform different types of abrasion tests. And can be used for both wet and dry testing.

Click here for information on additional attachments that can be used with the Linear Abraser to evaluate the relative resistance or susceptibility of a material surface to scratch, mar, gouge, and scrape.

The Taber Linear Abraser incorporates a horizontal arm that reciprocates in a linear motion. Attached to the end of the arm is a precision bearing spline shaft that creates a 'free-floating' test system and permits vertical movement. The test attachments are affixed to the bottom of the spline shaft and a weight support is mounted to the top. As the horizontal arm strokes back and forth, the test system raises or lowers vertically as the test attachment follows the contours of the specimen. A laser alignment guide assists with specimen set-up to ensures the abradant travels over the desired area.

Adjustable settings enable the user to select the speed, stroke length and test load. The Linear Abraser includes six preset speed buttons, along with the ability to adjust the speed from 2 to 75 strokes per minute. Eleven stroke lengths are standard ranging from 0.2 inch to 4.0 inch. 

Taber Linear Abraser 5750
The base load of the "free-floating" test system is 350 grams and consists of the test attachment; spline shaft; and weight support. Three 250g weight discs are supplied with the instrument and optional weight discs ranging from 10 to 250 grams can be added to the weight support to increase the test load to approximately 2100 grams. Optional accessories can be also be used to decrease the load. For example, an 150mm aluminum spline shaft and plastic Wearaser Collet Kit can bring the minimum load on the sample to as low as 60 grams. Taber's Linear Abraser is programmable to 999,999 cycles, but caution must be used as the abradant may wear prior to the end of the test.
The Wearaser® collet assembly is supplied with each Taber Linear Abraser, along with CS-10 and H-18 Wearaser abradants. The size and shape of a pencil eraser, the Wearaser is made using the same high quality Taber abrasive media found in our Genuine Taber abrading wheels. This permits the use of equivalent abrasive materials with the Linear Abraser as well as Taber's Reciprocating Abraser and the Taber Rotary Platform Abraser.

The Multi-Head Attachment (sold separately), incorporates an additional spline shaft, permitting two tests to be performed simultaneously with the Linear Abraser.

With the diversity of products that can be tested with the Taber Linear Abraser, it is up to the end-user to determine a suitable clamp or fixturing device appropriate to their product. Click here for additional information on specimen mounting available from Taber Industries.

Additional Information:

• Delivery Time: 6-8 weeks
• Packaging Details: Wearaser Collet and Spline Shaft (350 grams) 250 gram Weight Discs (3 ea.) CS-10 Wearasers (pkg. 10) H-18 Wearasers (pkg. 5) Power Cords (115V & 230V) Hex L-Key Tool Wearaser Depth Gauge Tool S-14 Refacing Strips (pkg. 50) Hand Brush

Product Details:

PosiTector® CMM IS
In Situ Concrete Moisture (RH) Meter
PosiTector CMM IS probes and free mobile app guide users through the ASTM F2170 documentation criteria. View and record readings directly with your Apple or Android smart device or PosiTector DPM Advanced gage
Easily collect and report relative humidity and temperature in concrete floor slabs in conformance with ASTM F2170
No need to open the hole or remove the cap. Probes remain powered on and broadcasting via Bluetooth while in situ for up to three weeks.
Combined sleeve and probe design simplifies the installation process and does not require consumables
Reusable Smart Probes
Fast response precision sensors provide accurate, repeatable readings
Certificate of Calibration showing traceability to NIST included (Long Form)

Product Details:

Magnetic Coating Thickness Gages for Non-Magnetic Coatings on SteelPosiTest magnetic pull-off thickness gage for the non-destructive measurement of non-magnetic coatings (paint, enamel, galvanizing, metalizing, plating, etc.) on steel.
-Highly wear resistant Carbide Probe for longest life and continuous accuracy
-Extra rugged housing, not affected by mechanical shock, water, acid or solvents
-Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement
-Positive visual and audible indicators to designate when thickness reading is established
-“V” grooves in probe housing and gage base allow correct positioning on cylindrical objects

Product Details:

With the C-2000 moisture meter from Delmhorst, you can effectively measure moisture content, ensuring high-quality cotton every time.

Product Details:

The F-2000/H is great for hop producers looking to enhance quality control.

Product Details:

ColorMeter is a new tool for color measuring, searching and color difference evaluation,with very smallsize and powerful color measurement performance. It can communicate with Android or IOS devices through Bluetooth, which expands the application range of color measuring instruments.
Measure the surface of the object under D65 light source.L*a*b, L*C*h,RGB,hex and other color data.AEab, A EOO color difference display, flexible setting of color difference tolorance.
"Pass"or "fail" directly on the screen.
You can use ColorMeter to set up your private color database in the Cloud.Without carrying a heavy color card, you can use colormeter to find the most similar color in multiple sets of color cards at any time anywhere.

 

 

 

Product Details:

It is used to test the percentage of materials containing bacteria suspended particles at the specified flow rate. The dual gas path simultaneous comparison sampling method is used to improve the accuracy of sampling, which is suitable for the performance testing of bacterial filtration efficiency of medical surgical masks by metrological inspection departments, scientific research institutes, medical mask manufacturers and other relevant departments.

Product Details:

It is mainly used to test the combustion performance of a mask after it contacts the flame at a certain linear speed. It is a special test instrument for the flame retardancy of a mask.

Product Details:

The G-7 is a rugged resistance-type meter, great for testing the moisture content of grain at harvest time and while in storage. The integral double-disc electrode cup holds only 3-4 grams, allowing for more uniform sampling and providing accurate and repeatable readings. You can even attach optional accessories to check moisture in bulk material and hay. The G-7 also provides useful statistics on stored readings.

Product Details:

• Simulating the dynamic conditions that occur in the ink-distributing system of a press, the Inkometer provides reliable data on the tack and length of ink.
• The Inkometer 1100's consistency allows you to quickly compare different inks, so you can evaluate new inks as well as maintain quality control in your press production.
• Features include test method storage, statistical reporting and data exporting, providing the tools to the testing lab that increase productivity in the printing and ink development industries

The Inkometer 1100 measures the apparent tack of printing ink under conditions closely approximating the dynamic conditions of the ink-distribution system of a printing press. The testing instrument provides the highest accuracy and efficiency for research and development, quality control and process evaluation to verify, test and improve quality.

This ink tack tester measures the integrated forces involved in ink film splitting and the effects of roller speed, film thickness, temperature and solvent evaporation.

The Inkometer 1100 consists of three rollers. The center roller is a temperature controlled brass roller. The bottom roller is an oscillating rubber composition distribution roller. The top roller is a rubber composition roller attached to the measuring system which measures tack. Rollers are available for testing standard and UV inks. The brass roller temperature is controlled by circulating a coolant mixture provided by a Constant Temperature Circulator (CTC).

The tack is reported in gram-meters and represents the torque required to "work" the ink film at a known rate with predetermined film thickness and temperature.

The Inkometer 1100 multi-line display shows the temperature, tack, roller speed and test time. Tack readings can be exported to the RS-232 port, the integrated printer or to a USB flash drive. Statistical reports can be viewed directly from the display. The Inkometer provides four test methods based on ASTM D-4361 as well as five user configurable methods that are stored in non-volatile memory.

Product Details:

DGBell's altitude simulation test chamber is suitable for battery low pressure (high altitude) simulation test, and all tested samples are at 11.6KPa. To test whether the battery will explode, catch fire or leak liquid.

Product Details:

Bell's Temperature Cycling test chamber is performed on materials to determine the resistance of exposure to alternating extremes of high and low temperatures.

Product Details:

Relevant standards requirement:

1. Test object: battery pack and system
2. Test procedure: The test object is most likely to fall in the direction of actual maintenance or installation. If it is not possible to determine the most likely fall direction, fall in the Z-axis direction, and the battery pack will fall from the height of 1 m to the concrete floor and observe for 2 hours.
3. Accept standard: The battery pack or system has no electrolyte leakage, fire nor explosion.

Product Details:

DGBell'S battery crush test chamber is used for battery crush test. This battery testing equipment simulates the conditions of the battery crushing and displays comminution results.

Product Details:

Relevant standards requirement:Single Storage Cell Safety Test6.2.4 Short circuit

1. Charge the single storage cellaccording to 6.1.3 standard
2. The cellis to be short-circuited by connecting the positive and negative terminal with a external resistance of less than 5mΩ for 10 min
3. Observe for 1H

Product Details:

Relevant standards requirements Single Storage Cell Safety TestDrop t testing steps

1. Charge the single storage cell according to 6.1.3
2. Drop the positive negative terminals of the cellfrom the height of 1.5m to the concrete floor
3. Observe for 1h

Battery Module Safety Test

1. Charge the battery module according to the standard 6.1.4
2. Drop the positive negative terminals of the battery from the height of 1.2m to the concrete floor
3. Observe for 1h

Product Details:

Cyclic corrosion testing provides the best possible laboratory simulation of natural atmospheric corrosion. Research indicates that test results are similar to outdoors in resulting structure, morphology, and relative corrosion rates.

Q-FOG cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements.

Q-FOG cyclic corrosion testers are the simplest, most reliable, and easiest to use corrosion testers available.

Product Details:

Cyclic corrosion testing provides the best possible laboratory simulation of natural atmospheric corrosion. Research indicates that cyclic corrosion testing results are similar to outdoor environments in resulting structure, morphology, and relative corrosion rates.

Q-FOG CRH cyclic corrosion chambers can perform traditional salt spray, Prohesion, and most cyclic automotive tests. They feature fully-adjustable relative humidity and precise control over ramp times. An optional shower function is also available. Q-FOG CRH chambers are available in two sizes to fulfill a wide range of testing requirements.

Q-FOG CRH cyclic corrosion testers are the simplest, most reliable, and easiest to use RH-controlled corrosion chambers available.

Product Details:

Everything you need for paint oven temperature profiling and paint cure calculations in one easy to use and convenient system. Having over 40 years experience in the manufacture of oven recorders for the coatings industry, Grant has designed the latest version of the OMK610 kit to boast many new features to assist in production quality control and reducing operating costs.

Direct report print out from the logger - no PC required in production
New enhanced thermal barrier giving maximum protection - now available with a heat absorbing insert
New fast response probes for both air and surface temperature
PaintView data storage, report generation and analysis included
Up to 6 temperature channels, storing up to 250,000 readings
The OMK610 kit comprises of an OQ610 data logger, PaintView software, thermal barrier, carry case and a quick start guide. A choice of temperature probes available additionally.

Benefits of using the OMK610 kit:

Meets paint manufacturers' specified cure parameters
Maintains a specified level of cure ensuring repeatable quality
Maximises oven usage and throughput
Optimises oven running (energy) costs
Archives data and results as part of any quality control system or supplier audit trail
Line operators can use it without the need for a PC.

Product Details:

Servo Computer Battery Crush Tester simulates the situation in which various types of lithium batteries are squeezed during use. Artificially present different conditions that may occur when the battery is squeezed.

Product Details:

This battery drop tester is used to test the drop impact performance of large, heavy-duty packaging products by simulating real surface, edge, and corner differences.

Product Details:

This newly battery washing tester consisting of test chamber and washing chamber under test chamber. Moreover, it motorized rotary propeller mounted inside of test chamber and on the internal wall of test chamber, the drying system is mounted.

Product Details:

Single storage cell safety test

1. Test object: Battery storage pack or system
2. Rotate the battery pack 360°around X axis with rotation speed of 6°/s; secondly rotate it 90°,180°,270°,360°,and remain for one hour after each move. Then stop and observe for 2 hours.
3. Rotate the batter pack 360°around Y axis with rotation speed of 6°/s; secondly rotate it 90°,180°,270°,360°,and remain for one hour after each move. Then stop and observe for 2 hours.
4. Accept standard: Battery pack or system has no electrolyte leakage, no rupture at case, no fire nor explosion. And remain the connection reliable, the structure intact, the insulation resistance value not less than 100 Omega /v.

Product Details:

The TABER® Multi-Finger Scratch / Mar Tester - Model 710 is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping, engraving and other similar physical damage not classified as ordinary wear. Based on the apparatus described in popular automotive specifications, the instrument is commonly referred to as a five-finger (five-arm) scratch & mar tester and most often used to evaluate plastics.

The Multi-Finger Scratch / Mar Tester includes a pneumatically driven, moveable platform to which the test specimen is mounted. The platform moves in a linear fashion, and is operated by a control knob for single or multiple pass testing. An electronic timer displays the rate of speed, which can be controlled by reducing or increasing air pressure.

A gantry supports five independent splined-fingers, which provide a constant, vertical load on interchangeable scratch tips. The gantry system includes a handle to raise and lower the arms. In addition, five support rests are incorporated to allow one or more arms to be moved to an upright, rest position such that the arm does not contact the specimen during testing.

Taber Multi-Finger Scratch / Mar Tester
Individual weights of varying loads mount to the top of each arm finger to exert a standard force on the surface of the test material. Each instrument includes a weight set of 2N, 3N, 4N, 5N, 6N, 7N, 10N, 15N and 20N loads. Optional weights sets are also available consisting of either 4N, 8N, 9N, 12N or 8N, 13N, 18N weights. In addition, an optional weight of 25N or Precision Weight Kit to achieve 0.6N loads are available.

Although flat specimens up to 22mm thick are normally tested, the ''free-floating'' arms fingers enable you test slightly contoured specimens provided they are rigid or adequately supported. A spring-loaded specimen holder is standard and can be mounted to the end or side of the moveable platform for greater flexibility. To mount contoured specimens, two specimen hold-down clamps are provided. An optional 5mm spacer set is available to raise the gantry to accommodate specimens that are greater than 22mm thick.

Additional Information:

• Item Code: 710

Product Details:

With the TABER® Shear / Scratch Tester, you can evaluate resistance to shearing, scratching, gouging, marring, scraping and engraving on a variety of flat, rigid specimens. It may also be used to test the relative homogeneity of materials, the adhesive qualities of protective coatings and the effects of age on similar materials.

A removable scale beam is mounted on a pivotal shaft projecting from an adjustable gage block. An adjusting screw permits the height of the pivotal shaft to be raised or lowered, corresponding with the thickness of a test specimen up to 12.7 mm (0.5 inches). This adjustment allows the scale beam to be maintained in a level position in respect to the specimen and turntable. Designed with an integrated bearing, the scale beam can be tilted in a rest position enabling the operator to mount or remove specimens.

Taber Shear / Scratch Tester
A calibrated sliding weight is mounted on the scale beam. By changing the position of the sliding weight, the load applied by the scratch tip (shear tool) can be adjusted between 0 to 500 grams. A second calibrated weight may be attached to the end of the scale beam, thus increasing the load capacity and changing the scale to 500 - 1000 grams. Engraved graduations are marked on the scale beam representing 10 grams per division.

Operated by an on/off switch, the motorized turntable rotates at a constant speed to ensure greater accuracy in test results. The turntable rotates in a counter-clockwise direction, but with a simple conversion the turntable rotation can be reversed (for more information contact Taber).

For materials sensitive to scratching, an optional Scale Beam Modified Weight Set is available that converts the scale by 1/10 to 0 - 50 gram range. To increase the testing load from 1000 to 1500g, an optional Scale Beam Fixed Weight is available. To satisfy EN 13310 (Kitchen Sinks - Functional requirements and test methods) an optional weight that provides a 15N load is also offered.

Product Details:

A powerful portable data logger for everyday use
The Squirrel 2010 is a versatile, general purpose logger, with 4 to 8 analogue input channels to measure current, voltage, resistance and temperature, plus 8 digital channels. All can be logged or used as triggers to automatically start or stop logging.

It is a compact, portable logger which is also suitable for bench based and fixed installations. Easily programmed via the four integral push buttons and large graphical display and with a basic accuracy of 0.1%, the Squirrel 2010 is able to fulfil many routine data logging needs, including more demanding applications requiring up to 10 readings per second on one channel.

Flexible
Very easy to use
Economical
Handheld, ergonomic design
USB connectivity with PC
Ethernet or RS232 communications options available
Extended battery life for unattended logging

Key Features
Compact, portable data logger
Powered from internal cells, external PSU or via USB connection
4 to 8 universal analogue inputs (current, voltage, resistance, temperature) plus 8 digital inputs
16 derived/calculated channels
2 alarm outputs
2 pulse counter inputs (1 at up to 64kHz, 1 at up to 100Hz)
Configured via large easy-to-read graphical display
0.1% accuracy, 24-bit A to D conversion
Up to 14 million readings
Supplied with SquirrelView set-up/download and export software
Up to 10 readings per second on 1 channel

Key Features
Compact, portable data logger
Powered from internal cells, external PSU or via USB connection
4 to 8 universal analogue inputs (current, voltage, resistance, temperature) plus 8 digital inputs
16 derived/calculated channels
2 alarm outputs
2 pulse counter inputs (1 at up to 64kHz, 1 at up to 100Hz)
Configured via large easy-to-read graphical display
0.1% accuracy, 24-bit A to D conversion
Up to 14 million readings
Supplied with SquirrelView set-up/download and export software
Up to 10 readings per second on 1 channel

Product Details:

The TABER® Rotary Platform Abrasion Tester - Model 5135 or 5155 is commonly referred to as the Taber Abraser (Abrader) or Rotary Platform Dual (Double) Head Tester. First introduced in the 1930''s, this precision built instrument was developed to perform accelerated wear testing. Capable of providing reliable data in a matter of minutes compared to the years that may be required by in-use testing, the Taber Abraser (Abrader) rapidly became the world standard for evaluating abrasion resistance.

Since its inception, the Taber Abraser has been used for quality & process control, research & development and material evaluation. Used to test a wide spectrum of materials, the instrument has been referenced in numerous standards and specifications (including plastics, coatings, laminates, leather, paper, ceramics, carpeting, safety glazing, etc.).

Product Details:

A test panel is clamped and slowly moved whilst a stylus or alternative tool scratches the surface. Depending on test procedures, specified or variable loads can be applied to obtain different degrees of failure, from trace to destruction. A voltmeter indicates the contact of the tool with the metallic sample substrate. Max. panel size : 100x150x1.6mm (0.3mm coating).

The Mechanised Scratch Tester comes with the weight set required by ISO 1518-1. The weight set specified by the preceding international standard, ISO 1518, is optionally available

Scope of Supply:
The Mechanised Scratch Tester (705) 220-240V / 50Hz – ISO 1518-1, 35 mm/s table speed, tungsten carbide hemispherical stylus, 20 N set of weights (2 x 0.5 N, 1 x 1.0 N, 2 x 2 N, 1 x 4 N and 1 x 10 N) and 1 spindle).

Product Details:

The QUV accelerated weathering tester reproduces the damage caused by sunlight, rain and dew. In a few days or weeks, the QUV UV tester can reproduce the damage that occurs over months or years outdoors. To simulate outdoor weathering, the QUV accelerated tester exposes materials to alternating cycles of UV light and moisture at controlled, elevated temperatures. It simulates the effects of sunlight using special fluorescent UV lamps. It simulates dew and rain with condensing humidity and/or water spray. The QUV accelerated weathering tester is the simplest, most reliable, and easiest to use weathering tester available. With thousands of testers in use worldwide, it is the world's most widely used weathering tester.

Product Details:

The Q-SUN Xe-2 rotating rack xenon arc test chamber reproduces the damage caused by full-spectrum sunlight and rain. In a few days or weeks, the Q-SUN Xe-2 tester can reproduce the damage that occurs over months or years outdoors.

The Xe-2 tester is a full-featured weathering, lightfastness and photostability chamber at a breakthrough price. It provides precise control of critical test parameters including spectrum, irradiance, relative humidity, chamber temperature and black panel/black standard temperature. Water spray is also an available option.

The versatile Q-SUN Xe-2 tester is the simplest, most reliable, and easiest to use rotating rack xenon arc tester available.

Product Details:

The Q-SUN Xe-3 xenon arc chamber reproduces the damage caused by full-spectrum sunlight and rain. In a few days or weeks, the Q-SUN tester can reproduce the damage that occurs over months or years outdoors.

The Q-SUN Xe-3 tester is a full-featured lightfastness, colorfastness, and photostability chamber at a breakthrough price. It utilizes three separate xenon lamps for a large capacity. The Q-SUN Xe-3 testers slide out specimen tray is 451mm x 718mm and is useful for exposing large, three-dimensional parts or components. The Xe-3 tester offers standard humidity control, and optional spray, back spray and chiller features.

The Q-SUN Xe-3 is the only xenon arc tester that also has an optional dual spray capability. This allows for a second liquid such as acid rain or soap solutions, to be sprayed onto test specimens.

The Q-SUN Xe-3 is the simplest, most reliable, and easiest to use full-sized xenon arc chamber available.

Product Details:

The Q-SUN B02 rotating rack xenon arc chamber was designed specifically to meet the ISO 105 B02 standard for textile lightfastness testing. After more than half a decade of successful sales around the world, the B02 tester has been discontinued in favor of an even more flexible model, the Q-SUN Xe-2.

Product Details:

For over 50 years, Q-PANEL steel and aluminum test substrates have been recognized as the world standard for a consistent and uniform test surface for paints, plating, adhesives, sealants, rust inhibitors and other coatings.

Thousands of labs around the world use millions of our steel and aluminum test panels every year for color development, weathering exposures, salt spray and corrosion testing, physical properties testing and quality control. A wide range of panel sizes and types are available for immediate shipment from stock.

Look for the Q-shaped hole. Its our trademark and your assurance of quality.

Product Details:

To test the tensile strength, peeling strength, heat sealing strength,tearing strength, piercing strength of plastic film, composite film, tape, soft packaging material, rubber sheets, paper, non-woven fabrics and other packaging materials, widely used in industries of plastic films, food, pharmaceuticals, inspection agency, research institute, college and so on.

Product Details:

The respiratory resistance tester is suitable for determining the inhalation resistance and exhalation resistance of respirators and mask protective products under specified conditions, and for the related testing and inspection of common mask products by manufacturers of national labor protection article inspection agencies.

Product Details:

Bell's Double-deck High Temperature Aging Test Chamber is widely used for the aging test for electronic products, solar panel, plastic products, especially for battery temperature aging test.

Product Details:

Thermal abuse test chamber is suitable for standard IEC 62133-2017, UL 1642 and GB 31241-2014.

Product Details:

Bells shock test System used to measure and determine the impact resistance of a product or package. It is mainly used to evaluate the reliability of the function and the integrity of the structure of the test product under an impact environment. Suitable for impact testing of aerospace, aerospace, marine, military, consumer electronics, automotive, household appliances and display equipment.

 

Product Details:

The Vibration Test System is a simulation of the various environments encountered in the manufacturing, assembly, transportation and use phases of execution. It is primarily used to identify the ability of a product to withstand environmental vibrations.

Product Details:

Thermal abuse test chamber protect for short circuit caused by incorrect operation of the operator and battery electrode, battery positive and negative connection, etc

Product Details:

Temperature cycling test chamber is suitable for testing various performance indexes of aerospace products, electronic instruments, materials, electronic products and various electronic components under the condition of rapid temperature change.

Product Details:

Relevant standards requirement:

1. Test Object: Battery storage pack or system.
2. The test object connects all the wiring harness, connector and other parts according to the whole vehicle connection mode. Select one of the following two methods to operate test at the room temperature.

• Immerse the test objects (in the direction of real vehicle assembling) into 3.5% NaCl solution (mass fraction, simulated under normal temperature water composition) for 2 hours. The water depth is to be sufficient to completely submerge the test objects.
• Test objects according to GB/T4208-2017 part 14.2.7 test method and test process.

Product Details:

Relevant standards requirement

1. Test Object: battery pack andsystem.
2. Refer GB/T4 part 5.5.2 test method, test according to GT/T2423.17 test conditions.
3. The salt solution was made up with sodium chloride (chemically pure and analytically pure) and distilled or deionized water???Its concentration is (5 + 1)% (mass fraction).
4. (35 +-2) ???, the measured pH value is between 6.5-7.2.
5. Placed the test objects in the salt spray chamber for cycling test. Each cycling duration for 24h. Spray salt solution to the test object for 8 hours under the temperature of (35+- 2) ??? , remain for 16 hours. Between the forth and the fifth hour in one cycles should be according to test requirement in GB/T 28046.1-2011, test mode with 3.2.
6. Total 6 cycles testing.
7. Salt spray test is not necessary for the test objects being installed in passenger, luggage or cargo compartments.

Product Details:

Thermal runaway test machine test the whole vehicle or the complete vehicle-borne ion battery system or the subsystem of vehicle-borne lithium-ion battery system, including a lithium ion battery and an electrically connected lithium ion battery. The applicable standard is UL 2580, IEC 62619.

Product Details:

This Walk in Explosion-proof Chamber is mainly used to test the safety performance of lithium ion battery, battery pack. Prevent test operators and other test equipment from being burned and exploding. At the same time, the explosion-proof test chamber with the smoke exhaust system can discharge the smoke generated in the test to the outside.

Product Details:

Test requirements

• IEC 62133-2017

Product Details:

The KS-D1 Digital Soil Moisture Tester, used with the GB-1 Gypsum Sensor Blocks, make up a valuable system to monitor the soil moisture available to the plants. This system eliminates guesswork, so that irrigation can be effectively scheduled, according to plants'' requirements.

Product Details:

HalTech’s HCO107 Carbon Monoxide Meter makes it easy to take quick measurements of low CO levels. Featuring the newest generation of electrochemical sensors, the HCO107 is a point-to-sample instrument and responds very quickly to ambient changes in CO concentration with a built-in pump. The special circuitry design allows for no drift and accurate measurements.

Product Description
Wide measuring range
Built-in pump for fast response
Direct real time digital reading
Manual and auto data save
High-speed USB data downloading
No warm-up time
Auto backlight
Simple and easy for self-calibration
Audible excess limit warning
External temperature and humidity sensors
Rechargeable Li-ion battery
MADE IN USA

Product Details:

The Taber® Crockmeter - Model 418 provides a quick and accurate method to determine the amount of color transferred from textile materials (such as fabric, carpeting, yarn and leather) to other surfaces by rubbing. The Crockmeter has also been employed to perform rub abrasion, scuff and / or mar tests on flat specimens. Plus, it can be used to conduct smudge and smear resistance tests on images produced by a printer or copier. Regardless of specimen material, both wet and dry testing can be performed.

Originally designed to simulate the action of a human finger and forearm, the Crockmeter uses a standard pressure and rubbing motion to provide reliable and reproducible test results. Specimens are positioned on the base of the Crockmeter and held in place with the sample holder. To prevent the specimen from shifting during testing, a sandpaper pad is provided to place under the specimen. A hand crank moves a reciprocating arm a distance of approximately 100mm. The rubbing action is provided by a 16mm diameter acrylic "finger" which moves back and forth in a straight line with each complete turn of the crank. The reciprocating load arm is weighted to provide a constant 9N load on the sample at all times and a mechanical counter keeps track of completed cycles.

Product Details:

High quality proofs using gravure inks of press viscosity are produced instantly using the new GP100. Featuring a
microprocessor controlled servo drive and pneumatic operation, electronically engraved printing plates and variable printing
speeds of 1 to 100m/min, this is an essential tool for all those involved in the manufacturing or use of liquid inks. Ideal for R&D and computer colour matching data, quality control and presentation samples, the GP100 is very easy to clean.

MAIN FEATURES 
* Any flexible substrate can be printed
* Excellent printability ensured by the high speed of 100 m/min
* Quick release doctor blade for easy cleaning
SPECIFICATION
Footprint: 780 x 500mm
Weight: 51kgs

GRAVURE
Ink is transferred from an electronically engraved printing plate directly onto the substrate, which is attached to the
rubber impression roller. Doctor blade and roller adjustments are made pneumatically allowing repeatable settings for future tests.

CLEANING
The essential job of cleaning various machine components following each proofing run has been simplified by careful
design. The illustration (left) shows the doctor blade being removed for cleaning. It can be seen that the printing
plate and impression roll are easily accessible for cleaning.

PRINTING PLATES
The New GP100 uses the same electronically engraved printing plates as used on our well known Printing Proofer
and are manufactured in exactly the same way as production cylinders. A choice of one or more of the
standard plates available will normally be satisfactory but special plates including those with a logo and/or
company details can be supplied. Maximum engraved area: 160X95mm.

A SOLID AREA PLATE
100 lines/inch (40 lines/cm) Density: 100%
150 lines/inch (60 lines/cm) Density: 100%
200 lines/inch (80 lines/cm) Density: 60%#

B SINGLE 3 WEDGE PLATE
150 lines/inch (60 lines/cm) Density: 100-80-60%

C 1+4 WEDGE PLATE
150 lines/inch (60 lines/cm) Density,
half area 90% and adjacent step wedges
100-90-80-70%

D DOUBLE 8 WEDGE PLATE
150 lines/inch (60 lines/cm) Density:
100-95-90-85-80-75-70-60%

Product Details:

soluble salt on metal surfaces. Measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9.

-Conductivity probe specifically designed for ISO 8502-6, 9
-Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or µg/cm2)
-Easy 1-2-3 gage interface guides users through the Bresle test method
-Automatic storage of a background (blank) measurement — handy when performing multiple tests
-PosiTector interchangeable platform – attach any PosiTector probe to a single gage body
-USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software

Product Details:

BEVS Non Contact Automatic Color Measurement Machine (NCACM) is an intelligent and automatic non-contact color measurement system based on BEVS intelligent control system and spectrophotometer. It has high integration and scalability. BEVS NCACM is able to realize continuous and fast non-contact measurement and the efficiency increased by more than 60%. It can also reduce the damage and scratch when contacting the sample during measuring. BEVS NCACM has a more prominent advantage in measuring small sample,it can measure many samples at a time with fixture.

Product Details:

The JDC has become the accepted standard for most corporations worldwide for preparing samples of paper,
paperboard, metal foils, nonwovens, films, tissue and a variety of other materials. Lightweight and portable, the JDC features
a 20” base length for added leverage and stability along with operator safety.
The JDC cuts test strips to an exact width and parallel throughout the entire blade length.
The positive cutting action of the dual blades and precision ground base shear cut both
sides of the sample at once assuring you of a clean, accurate cut every time. The cutting
blades are made of special tool steel which is stress-relieved by cycling between cold and hot temperatures to prevent the
blades from warping.
The JDC cutter is designed to last for many years and a reconditioning service is available that provides the capabilities
of a brand new cutter for half the cost. Reconditioning includes regrinding the cutting blades and providing a new base shear.

Product Details:

Application
Used for face mask air flow resistance and differential pressure testing to check breathability and can also be used to check differential pressure of textile materials gas exchanger.

Principle
The output of the air flow is set by a gas flow meter, the air flow passes through a certain area of the test sample, the current pressure is detected by a pressure sensor, and the pressure difference is calculated.

Product Details:

It is to test the filtering efficiency of particulate protective masks and medical masks and to determine the resistance of ordinary fabrics and medical protective masks to the constant flow of airflow.

Product Details:

For disinfection of large spaces. Removable aerosol disinfection and sterilization equipment, manual and automatic control, timing and quantitative spraying, adjustable spray volume Suitable for hospitals, campuses, stations, airports, and other large public places.
Under the action of compressed air, the medicinal solution is spouted from the nozzle to form aerosol ions of 2 to 10 μm, which quickly and fully integrates in the ambient air; kills pathogenic microorganisms in the air, and realizes a full range of dead space-free disinfection of the environmental space. Sterile environment. The sterilized objects will not form dew condensation and form droplets.

Product Details:

Application
GB-BF20010 Mask Synthetic Blood Penetration Tester is suitable for the resistance of masks to the penetration of synthetic blood under different levels of test pressure.

Principle
The mask material was tested with synthetic blood under continuous applied pressure, and the penetration of synthetic blood on the material was visually checked.

Product Details:

9802-K Ethylene oxide gas chromatography comes with reasonable structure, stable and reliable performance, simple operation and easy maintenance. It can be widely used in the production and scientific research departments such as petroleum, chemical industry, pesticide, medicine and hygiene, commodity inspection, environment protection, college and so on. It is to detect organic solvents, the solvent residue of printed packaging materials and the purity or content of a single solvent.

This Battery Crush Nail Penetration Tester is used to simulate the battery penetration test of a sharp object during packaging, transportation, storage, use and disposal.

Product Details:

Simple and accurate testing of wet film hiding power
Determines thickness needed for complete opacity
Gives estimate of coverage in square metres per litre

The Rhopoint PaintLab+ Cryptometer is a wedge type film applicator, which determines the wet hiding power of a coating within a few minutes.

Features:
Simple and accurate testing of wet film hiding power
Determines thickness needed for complete opacity
Gives estimate of coverage in square metres per litre
Suitable for use with coatings containing pigments
Ideal choice for quality control environment

Cryptometer Design:
The instrument consists of a glass plate, half black half white as the base. Each half of this base has a scale engraved from 0-50mm along one edge starting from the division in the centre. Two glass top plates are included with each instrument and these have two metal supports at one end so that these transparent top plates rest at an angle when placed upon the black and white area of the base plate.

The top plates differ in the length of their tiny supports so that different angles are formed between the top plates and the base plate. A wedge angle constant (K) is given to each top plate. These range from the smallest angle K= .002 to K= .0035, K= .004, K= .007 and the largest K= .008, the popular constants being K= .004 and K= .008.

Product Details:

For over 50 years, Q-PANEL test substrates have been recognized as the world standard for a consistent and uniform test surface for paints, plating, adhesives, sealants, rust inhibitors and other coatings. This consistency and uniformity is now available through Q-Labs CX-series corrosion test coupons.

Corrosion test coupons ensure repeatability and reproducibility when performing laboratory corrosion testing. They help a user independently monitor the test conditions in the chamber, by measuring the mass loss of the coupons as the test progresses. CX corrosion coupons are designed to meet the stringent requirements specified in modern corrosion test methods, such as GMW14872, GM9540P, SAE J2334, SAE J2721, ASTM B117, ISO 9227, and VDA-233-102.

All Q-PANEL CX-series corrosion coupons include Certificate of Analysis, come pre-cleaned and ready to use right out of the package. This allows the user to simply measure the panels and place them in the tester, saving time and effort. And best of all, CX corrosion coupons are often half the price of competitors coupons.