Petroleum and Concrete Testing Instruments

Product Details:

Easily portable, ready for spot checks or continuous use, this battery powered hygrometer indicates both dew point temperatures and water vapour to less than one part per million, on the large meter dial. As the reading is specific to water vapour, calibration is accurate for different gases. Accuracy is guaranteed to better than one part in a million of moisture in very dry air or gas. The self extending head allows up to 20 litres a minute flow for clearing the air supply pipe work without wetting the test chamber. Note the absence of knobs, calibrating, cooling, and servicing as required by some other methods, and the automatic dry down measuring head which ensures quick response from the sensor.

Product Details:

Accurately measure the unwind force of a roll of tape with the ChemInstruments High Speed Unwind Machine. The High Speed Unwind Machine meets the standards specified in ASTM D 1000 and AFERA 4008 for unwind force at a fast rate of removal. It will also test the unwind force of pressure sensitive tapes according to Test Methods PSTC-8 and PSTC-13.

Additional Information:

• Item Code: HSR-1000

Product Details:

Multi-Cross Cutter 295/I - 6 edges, cutting distance 1 mm, for Grid Cutting Tests acc. to EN ISO, ISO, VDA and EN, incl. magnifying glass, polyamide bristle brush and plastic case Multi-Cross Cutter 295/II-6 edges, cutting distance 2 mm, for Grid Cutting Tests acc. to EN ISO, ISO, ASTM, JIS and VDA, incl. magnifying glass, polyamide bristle brush and plastic case Multi-Cross Cutter 295/VII -6 edges, cutting distance 3 mm, for Grid Cutting Tests acc. to EN ISO, ISO, JIS and VDA, incl. magnifying glass, polyamide bristle brush and plastic case Multi-Cross Cutter 295/IX - with free turnable axle between hand grip and cutting head, 6 edges, cutting distance 1 mm, for Grid Cutting Tests acc. to EN ISO, ISO, VDA and EN, incl. magnifying glass, polyamide bristle brush and plastic case. Multi-Cross Cutter 295/X -with free turnable axle between hand grip and cutting head, 6 edges, cutting distance 2 mm, for Grid Cutting Tests acc. to EN ISO, ISO, ASTM, JIS, and VDA, incl. magnifying glass, polyamide bristle brush and plastic case. Multi-Cross Cutter 295/V-11 edges, cutting distance 1 mm, for Grid Cutting Tests acc. to ASTM and JIS, incl. magnifying glass, polyamide bristle brush and plastic case. Multi-Cross Cutter 295/VI-11 edges, cutting distance 2 mm, for Grid Cutting Tests acc. to ISO, BS and NF, incl. magnifying glass, polyamide bristle brush and plastic case. Multi-Cross Cutter 295/IV – 2 edges, cutting distance 5mm, for Grid Cutting Tests acc. to EN (formerly ECCA), incl. magnifying glass, polyamide bristle brush and plastic case, for all coil coatings.

 

Product Details:

Pensky Martens Flash Point Apparatus. These help in determining flash points with the help of cup tester of liquid fuel oils, suspensions of solids, lube oils and liquids that tend to form a surface film under test conditions.

Features:

• Electric heating with regulator
• Electric stirrer 120 rpm
• Needle valve for a fine adjustment of the flame
• Manual flame presentation

Other Details:

• These are semi-automatic testers that are housed in a cast aluminium case
• Electricity, gas and cooling water is incorporated
• The heating bath can be controlled to provide a temperature rise of 5° to 6°C/min for ASTM D93-IP34 Method A
• Stirrer stop/start and shutter are motor driven and controlled by a push-button
• Ideal to be uses with main gas or canister gas

Product Details:

Viscosity Bath is designed with a rectangular housing that is enclosed in a pyrex jar having 300 mm diameter and is 450 mm high. Further, these have electric immersion heater (200w) for eight standard capillary viscometers. Apart from this, these baths are available with an electronic temperature controller with digital readout and setting ranging from 10 to 125°c to the nearest 0. 1°c. The specifications of these baths are as follows:

Features:

• low water cut-off device
• to provide an excellent temperature uniformity in bath (better than 0. 01°c), we have an efficient stirring system that is adjustable externally
• exclusive free moving turn table bringing each of the eight viscometers in front of operator
• cooling coil for below ambient temperature as well as operation around
• ref. 941131
• constant temperature viscosity bath “precision” (max. 120°c) with glass jar of 30 litres, electronic digital temperature control and 8 places for common viscometers