Plastic and Pipeline Coating Test Instruments

Product Details:

The Coesfeld Portable Tension Tester

• Determines the peeling resistance of plastic-covered steel pipes.
• Assesses the adhesive power of other coatings and foils
• Portable tension tester.

Additional Information:

• Item Code: MTT-1500

Product Details:

MANUAL CUPPING TEST

Revolutionary apparatus for testing the resistivity of coatings at various stages of deformation in accordance with ISO 1520. The built in gear-box minimizes the manual force which is required to deform the test panel, allowing to perform a smooth deformation. The degree or deformation is digitally displayed at a resolution of 0.01 mm.Mandatory test in Qualicoat, QIB and GSB accredited laboratories.

Product Details:

Coesfeld Cathodic Disbonding Tester is offered with a current meter with channel selector switch. These have an adjustable nominal voltage range of ±5000mV. Some features of these material tests include.

 

Features:

• Sets connection cables with plug
• Analog outputs E and I
• Different current ranges 20 mA / 2 mA / 200 μA
• Max. current ±20 mA

Product Details:

Coesfeld Tear Analyser System Bayer

Measuring appliance for dynamic determination of the fracture mechanical behaviour of elastomer samples and determination of crack growth. under variable load profiles and selectable elongations with compensation of the remaining elongation by servo-motorical restressing measurement of the forces vs. time, the elongation vs. time and the crack sizes during the test.

Product Details:

IC Vicat/HDT
Tests according to ISO and ASTM
Creep tests are possible
Automatic start of integrated cooling (water supply required)
Motorized specimen immersion
Upgrade to IC+ for automatic load application

The ECO Vicat and the HDT Automat enable tests to be carried out without an operator,
e.g. overnight or at the weekend.
ECO Vicat (oil-free)
Tests without oil (contact heat transfer) acc. to ISO 306
Automatic test procedure
Cooling by pressurized air or water
No need to apply weights, automatic loading
Optional: robotic sample feed  can test up to 120 specimens fully automatically


HDT Automat
Fully automated 24/7 measurement of the heat deflection temperature
6 measuring stations
Automatic weight appliance, sample measurement and sample feeding
Cooling from 300°C to room temperature in 12 minutes
Magazine for up to 90 samples

Product Details:

• Application: Single cell crush test (cylinder, pouch, prismatic cell, etc)
• Crush Tool: Semi-cylinder, hemisphere (According to test standard)

Product Details:

The Hanatek Melt Flow Index MFI is used to accurately measure the melt characteristics of thermoplastic polymers.

Understanding melt flow is a key indicator for producers, processors and converters of plastic materials as it dictates the temperatures and pressures required to manufacture consistent quality products

Features:

• a key indicator for processors, converters and producers of plastic material is understanding the melt flow
• the temperatures and pressures that are required to manufacture consistent quality products is provided by these indicators

Product Details:

Soluble salts on a surface are absorbed into a special filter paper soaked with distilled water. The SCM 400 measures the conductivity of the wet paper, calculates the salt level and displays it in ug cm¯²

Additional Information:

• Item Code: SCM-400

Product Details:

Bell's Double-deck High and Low Temperature Test Chamber was designed to test battery cells combined with charge and discharge equipment, and also available for thermal tests for small products and components.

 

Product Details:

This battery projectile / burning tester is suitable for testing the flame resistance and flammability of various consumer batteries, such as mobile phones and notebook computers.

Product Details:

Cathodic Disbonding Tester DIN 30 671 – ASTM G 8 – DIN EN 10 285

Product Details:

TQC Bresle Test Kits help us in determining the presence of the soluble salts that are expressed in milligram per square meter.