Testing Instruments

Product Details:

We deals with a Portable Hardness Tester.

Product Details:

DGBell's altitude simulation test chamber is suitable for battery low pressure (high altitude) simulation test, and all tested samples are at 11.6KPa. To test whether the battery will explode, catch fire or leak liquid.

Product Details:

DGBell'S battery crush test chamber is used for battery crush test. This battery testing equipment simulates the conditions of the battery crushing and displays comminution results.

Product Details:

Measures coatings on metal substrates. It is the economical choice that retains the uncompromising quality of DeFelsko coating thickness a nd inspection instruments.
Available in Two Models - 
PosiTest DFT Ferrous (Test DFT Ferrous) or 
PosiTest DFT Combo (n Measures both non-magnetic coatings on steel AND non-conductive coatings on aluminum,
brass, etc. Automatically recognizes the
substrate and takes a measurement)

Fast, repeatable measurements - 60+ readings per minute
Ready to measure - No adjustment required for most applications
Zero or 1 Point Calibration Adjustment for complex applications
Onscreen averaging for up to 99 readings
Strong, wear-resistant, ruby-tipped probe
Adjustable display brightness for optimal visibility in all environments
Auto rotating display with rotation lock
Simple icon based menu
Certificate of Calibration showing traceability to PTB included (Long Form)
Conforms to ISO 2178/2360/2808, ISO 19840, ASTM B244/B499/D7091/E376, BS3900-C5, SSPC-PA2 and others.

Product Details:

Viscosity measurement of coatings is essential at each stage of the manufacturing process to ensure consistent quality standards. Many parameters can affect the rheological behaviour of a finished coating resulting in undesirable effects such as inconsistent performance, poor levelling or sagging. The use of high precision measuring instruments is therefore essential in quality control to prevent such problems occurring during formulation, manufacture and application. The Paintlab+ Viscomixer is a versatile instrument used to measure the change in viscosity during the addition of a solvent or thinner. Three Viscomixer models are available each offering a different measuring range according to the viscosity of the test sample. A sample from a production batch can be quickly and easily measured in a 250ml tin and the required thinning ratio determined for scaling into the production process. The instrument operates at a fixed speed of 562rpm to directly measure the viscosity in Poise (P).

FEATURES
Rhopoint Viscomixer Viscometer ScreenPrecise Measurement

High stability motor speed control ensures accuracy and repeatabilty during each test.

Real-time high resolution graphing allows monitoring of changes during measurement providing identification of inconsistencies between samples.

Measurement results are displayed instantly on screen after test in all three units.

Advanced temperature monitoring

An integrated temperature probe accurately measures and records sample temperature for each test. As sample viscosity is influenced by test temperature, accurate monitoring and recording ensures reliability of test results.

Paint Resistant Design

Lab-tough glass allows easy removal and cleaning of unintentional splashes and smears from the capacitive sense buttons and screen.

The solvent resistant anodised aluminium instrument chassis ensures the instrument can be cleaned and restored to pristine condition even in the toughest working environments.Viscometer Printer Label

Data transfer

Measurement data including time, date and test temperature can be printed to a Rhopoint label printer (supplied as an optional accessory).

Printed labels can be attached to each sample for easy identification and recording of results.

Flexible range configuration

The Viscomixer can be configured for any of the three ranges by purchasing an additional paddle for the range required along with a calibration oil kit.

Full details of paddles available along with their respective calibration kits are detailed at the back of the brochure.

Calibration

Annual calibration can be performed remotely by the user using the Rhopoint certified recalibration kit. Step by step instructions and automatic verification ensure accurate, traceable results.
INSTRUMENT SPECIFICATION

RANGE
0.1 - 15 P
0.1 - 65 P
1.0 - 340 P *

RESOLUTION
0.1 P (1.0 P*)
ACCURACY
+/- 2%

REPEATABILITY
+/- 1%

SPEED
562 rpm +/- 0.1%

CONTAINER SIZES
250ml

OPERATING TEMPERATURE
15° C to 35° C

POWER
90-240V AC - 50/60 Hz

WEIGHT
7.25 kg

SIZE
(H) 460 x (W) 320 x (D) 190 mm

PACKED WEIGHT
10 kg

INCLUDED ACCESSORIES
COMMODITY CODE
Temperature verification probe
Traceable calibration certificate
ORDERING CODES
Viscometer | Order code
0-15 P | RL-A30-VISCOMIXER/0-15P
0-65 P | RL-A30-VISCOMIXER/0-65P
0-340 P | RL-A30-VISCOMIXER/1-340P

Product Details:

It is used to test the percentage of materials containing bacteria suspended particles at the specified flow rate. The dual gas path simultaneous comparison sampling method is used to improve the accuracy of sampling, which is suitable for the performance testing of bacterial filtration efficiency of medical surgical masks by metrological inspection departments, scientific research institutes, medical mask manufacturers and other relevant departments.

Product Details:

We deals with a different kind of Erichsen Testing Machine.

Product Details:

Type Orifice Diameter Viscosity Range Flow Times
DIN FLOW CUP
Din Flow Cup (2mm) - Din 53211 2mm (0.08”) 15 - 30cSt
Din Flow Cup (4mm) - Din 53211 4mm (0.16”) 112 - 685cSt
Din Flow Cup (6mm) - Din 53211 6mm (0.24”) 550 - 1500cSt
Din Flow Cup (8mm) - Din 53211 8mm (0.31”) 1200 - 3000cSt
(approximately

FORD FLOW CUP
Ford Flow Cup No 1 - ASTM D1200 2.1mm (0.08”) 10 - 35cSt 55 - 100 secs
Ford Flow Cup No 2 - ASTM D1200 2.8mm (0.11”) 25 - 120cSt 40 - 100 secs
Ford Flow Cup No 3 - ASTM D1200 3.4mm (0.13”) 49 - 220cSt 30 - 100 secs
Ford Flow Cup No 4 - ASTM D1200 4.1mm (0.16”) 70 - 370cSt 30 - 100 secs
Ford Flow Cup No 5 - ASTM D1200 5.8mm (0.23”) 200 - 1200cSt 30 - 100 secs
The orifices are manufactured from stainless steel.


ISO/ASTM FLOW CUP
Flow Cups to BS EN ISO 2431, ASTM D5125 3mm (0.12”) 7 - 42cSt 30 - 100 secs
Flow Cups to BS EN ISO 2431, ASTM D5125 4mm (0.16”) 35 - 135cSt
Flow Cups to BS EN ISO 2431, ASTM D5125 5mm (0.20”) 91 - 325cSt
Flow Cups to BS EN ISO 2431, ASTM D5125 6mm (0.24”) 188 - 684cSt
Flow Cups to BS EN ISO 2431, ASTM D5125 8mm (0.31”) 600 - 2000cSt
The orifices are manufactured from stainless steel.

AFNOR FLOW CUP
Afnor Flow Cup - 2.5mm - NF T30-014 2.5mm (0.10”) 5 - 140cSt 30 - 100 secs
Afnor Flow Cup - 4mm - NF T30-014 4mm (0.16”) 50 - 1100cSt
Afnor Flow Cup - 6mm - NF T30-014 6mm (0.24”) 510 - 5100cSt
Afnor Flow Cup - 8mm - NF T30-014 8mm (0.31”) 700 - 11500cSt


FRIKMAR FLOW CUP
Frikmar Flow Cup 2mm 2mm (0.08”) 15 - 30 cSt 25 - 150 secs
Frikmar Flow Cup 4mm 4mm (0.16”) 112 - 685cSt
Frikmar Flow Cup 6mm 6mm (0.24”) 550 - 1500cSt
Frikmar Flow Cup 8mm 8mm (0.31”) 1200 - 3000cSt
The orifices are manufactured from stainless steel. (approximately

Product Details:

The TQC Automatic Cupping Tester allows to perform a cupping (Erichsen / Dent) test on coated steel panels to define the resistance of paint, varnish or related products to cracking and/or detachment from a metal substrate when subjected to gradual deformation by indentation under standard conditions.

The test is either used as a “pass / fail” test by testing to a specified depth or defining the minimum depth at which a coating fails by gradually increasing the indentation.

The ISO 1520 standard requires panels to be slowly deformed at a steady rate between 0,1 mm/s and 0,3 mm/s without interruption. Especially with thicker steel panels hand-operated testers not always allow an uninterrupted deformation.

The TQC Automatic Cupping Tester is driven by a micro-step controlled electro motor which allows precise and steady deformation with 0,01 mm steps. Operation is intuitive by means of a jog-dial switch and a multi-lingual operating menu on a large illuminated display.

An integrated LED powered sample illumination system comforts examining the coating under test. To guarantee maximum visibility of all possible types of surface including high gloss, matte or colored samples the angle of the LED light can be set. Choose light from just one or all directions. The strength of the LED’s is adjustable but also the colors can be changed to achieve maximum contrast.

Mandatory test in Qualicoat and QIB accredited laboratories.

Product Details:

It is mainly used to test the combustion performance of a mask after it contacts the flame at a certain linear speed. It is a special test instrument for the flame retardancy of a mask.

Product Details:

The TABER® Multi-Finger Scratch / Mar Tester - Model 710 is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping, engraving and other similar physical damage not classified as ordinary wear. Based on the apparatus described in popular automotive specifications, the instrument is commonly referred to as a five-finger (five-arm) scratch & mar tester and most often used to evaluate plastics.

The Multi-Finger Scratch / Mar Tester includes a pneumatically driven, moveable platform to which the test specimen is mounted. The platform moves in a linear fashion, and is operated by a control knob for single or multiple pass testing. An electronic timer displays the rate of speed, which can be controlled by reducing or increasing air pressure.

A gantry supports five independent splined-fingers, which provide a constant, vertical load on interchangeable scratch tips. The gantry system includes a handle to raise and lower the arms. In addition, five support rests are incorporated to allow one or more arms to be moved to an upright, rest position such that the arm does not contact the specimen during testing.

Taber Multi-Finger Scratch / Mar Tester
Individual weights of varying loads mount to the top of each arm finger to exert a standard force on the surface of the test material. Each instrument includes a weight set of 2N, 3N, 4N, 5N, 6N, 7N, 10N, 15N and 20N loads. Optional weights sets are also available consisting of either 4N, 8N, 9N, 12N or 8N, 13N, 18N weights. In addition, an optional weight of 25N or Precision Weight Kit to achieve 0.6N loads are available.

Although flat specimens up to 22mm thick are normally tested, the ''free-floating'' arms fingers enable you test slightly contoured specimens provided they are rigid or adequately supported. A spring-loaded specimen holder is standard and can be mounted to the end or side of the moveable platform for greater flexibility. To mount contoured specimens, two specimen hold-down clamps are provided. An optional 5mm spacer set is available to raise the gantry to accommodate specimens that are greater than 22mm thick.

Additional Information:

• Item Code: 710

Product Details:

With the TABER® Shear / Scratch Tester, you can evaluate resistance to shearing, scratching, gouging, marring, scraping and engraving on a variety of flat, rigid specimens. It may also be used to test the relative homogeneity of materials, the adhesive qualities of protective coatings and the effects of age on similar materials.

A removable scale beam is mounted on a pivotal shaft projecting from an adjustable gage block. An adjusting screw permits the height of the pivotal shaft to be raised or lowered, corresponding with the thickness of a test specimen up to 12.7 mm (0.5 inches). This adjustment allows the scale beam to be maintained in a level position in respect to the specimen and turntable. Designed with an integrated bearing, the scale beam can be tilted in a rest position enabling the operator to mount or remove specimens.

Taber Shear / Scratch Tester
A calibrated sliding weight is mounted on the scale beam. By changing the position of the sliding weight, the load applied by the scratch tip (shear tool) can be adjusted between 0 to 500 grams. A second calibrated weight may be attached to the end of the scale beam, thus increasing the load capacity and changing the scale to 500 - 1000 grams. Engraved graduations are marked on the scale beam representing 10 grams per division.

Operated by an on/off switch, the motorized turntable rotates at a constant speed to ensure greater accuracy in test results. The turntable rotates in a counter-clockwise direction, but with a simple conversion the turntable rotation can be reversed (for more information contact Taber).

For materials sensitive to scratching, an optional Scale Beam Modified Weight Set is available that converts the scale by 1/10 to 0 - 50 gram range. To increase the testing load from 1000 to 1500g, an optional Scale Beam Fixed Weight is available. To satisfy EN 13310 (Kitchen Sinks - Functional requirements and test methods) an optional weight that provides a 15N load is also offered.

Product Details:

We deal with a superior quality Viscosity Instruments.

Product Details:

We deal with a different kind of Tensile Strength Tester.

Product Details:

A test panel is clamped and slowly moved whilst a stylus or alternative tool scratches the surface. Depending on test procedures, specified or variable loads can be applied to obtain different degrees of failure, from trace to destruction. A voltmeter indicates the contact of the tool with the metallic sample substrate. Max. panel size : 100x150x1.6mm (0.3mm coating).

The Mechanised Scratch Tester comes with the weight set required by ISO 1518-1. The weight set specified by the preceding international standard, ISO 1518, is optionally available

Scope of Supply:
The Mechanised Scratch Tester (705) 220-240V / 50Hz – ISO 1518-1, 35 mm/s table speed, tungsten carbide hemispherical stylus, 20 N set of weights (2 x 0.5 N, 1 x 1.0 N, 2 x 2 N, 1 x 4 N and 1 x 10 N) and 1 spindle).

Product Details:

We deal with Surface Tester.

Product Details:

"SAMES" France AP 1000 Paint resistivity meter The resistivohmeter AP 1000 is a handheld meter designed for fast measurement of the resistivity of paints and varnishes for electrostatic spraying. We admit that any materials sold on the open market can be sprayed electrostatically, under the condition that the solvent (or thinner) they use have certain qualities. The resistivity of the mixture is the main feature we are interested in. AP 1000 is the tool essential to paint labs, customers’ inspection dept., and other electrostatic equipment end users.

Product Details:

• A metal box with, lid open, a control plate showing: A - The meter with 3 reading scales, red, black and blue
• B - The diode LED for batteries check.
• C - The red, black and blue buttons correspond to their respective measuring scales on the display.
• The measurement probe (D), connected to the box through flexible and solvent resistant cable.
• For storage, the probe fits snuggly inside the box.

 

Product Details:

Bell's Temperature Cycling test chamber is performed on materials to determine the resistance of exposure to alternating extremes of high and low temperatures.

Product Details:

Temperature cycling test chamber is suitable for testing various performance indexes of aerospace products, electronic instruments, materials, electronic products and various electronic components under the condition of rapid temperature change.

Product Details:

We deal with a different kind of Hardness Testing Machine.

Product Details:

We deal with Moisture Determination Balance.

Product Details:

We deal with a different kind of Temperature Cycling Chamber.

Product Details:

We deal with a different kind of Analytical Balances.

Product Details:

We deal with a different kind of Humidity Test Chamber.

Product Details:

We deal with a different kind of Humidity Tester.

Product Details:

Relevant standards requirement:

1. Test object: battery pack and system
2. Test procedure: The test object is most likely to fall in the direction of actual maintenance or installation. If it is not possible to determine the most likely fall direction, fall in the Z-axis direction, and the battery pack will fall from the height of 1 m to the concrete floor and observe for 2 hours.
3. Accept standard: The battery pack or system has no electrolyte leakage, fire nor explosion.

Product Details:

Relevant standards requirement:Single Storage Cell Safety Test6.2.4 Short circuit

1. Charge the single storage cellaccording to 6.1.3 standard
2. The cellis to be short-circuited by connecting the positive and negative terminal with a external resistance of less than 5mΩ for 10 min
3. Observe for 1H

Product Details:

Relevant standards requirements Single Storage Cell Safety TestDrop t testing steps

1. Charge the single storage cell according to 6.1.3
2. Drop the positive negative terminals of the cellfrom the height of 1.5m to the concrete floor
3. Observe for 1h

Battery Module Safety Test

1. Charge the battery module according to the standard 6.1.4
2. Drop the positive negative terminals of the battery from the height of 1.2m to the concrete floor
3. Observe for 1h

Product Details:

Hi Lo Welding Gauge Measures Internal Alignment of pipe after fit-up alignment, cuts radiographic rejects.

Product Details:

We deal with a different kind of Compression Testing Machine.

Product Details:

We deal with a High Temperature Furnaces.

Product Details:

Servo Computer Battery Crush Tester simulates the situation in which various types of lithium batteries are squeezed during use. Artificially present different conditions that may occur when the battery is squeezed.

Product Details:

This battery drop tester is used to test the drop impact performance of large, heavy-duty packaging products by simulating real surface, edge, and corner differences.

Product Details:

This newly battery washing tester consisting of test chamber and washing chamber under test chamber. Moreover, it motorized rotary propeller mounted inside of test chamber and on the internal wall of test chamber, the drying system is mounted.

Product Details:

Single storage cell safety test

1. Test object: Battery storage pack or system
2. Rotate the battery pack 360°around X axis with rotation speed of 6°/s; secondly rotate it 90°,180°,270°,360°,and remain for one hour after each move. Then stop and observe for 2 hours.
3. Rotate the batter pack 360°around Y axis with rotation speed of 6°/s; secondly rotate it 90°,180°,270°,360°,and remain for one hour after each move. Then stop and observe for 2 hours.
4. Accept standard: Battery pack or system has no electrolyte leakage, no rupture at case, no fire nor explosion. And remain the connection reliable, the structure intact, the insulation resistance value not less than 100 Omega /v.

Product Details:

We deal with a Specific Gravity Balance.

Product Details:

We deal with a Plastic Testing Equipment.

Product Details:

We deal with a different kind of Petroleum Testing Equipment.

Product Details:

We deal with a Abel Flash Point Apparatus.

Product Details:

We deal with superior quality of Loop Testers.

Product Details:

We deal with a different kind of Lab Incubator.