Adhesion and Impact Tester

Product Details:

Measures adhesion of coatings to metal, wood, concrete and other rigid substrates.
-Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583
-Environmentally sealed enclosure – weatherproof, dustproof and shockproof - meets or exceeds IP65
-Inexpensive, single-use dollies eliminate cleaning for re-use and can be kept as a permanent record
-Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
-10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths
-Calibrated and certified to ± 1% accuracy using a NIST traceable load cell
-Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4642/16276-1, BS EN 12004-2, AS/NZS 1580.408.5 and others

Product Details:

Measures adhesion of coatings to metal, wood, concrete and other rigid substrates.
> Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583
> Environmentally sealed enclosure – weatherproof, dustproof and shockproof - meets or exceeds IP65
> Inexpensive, single-use dollies eliminate cleaning for re-use and can be kept as a permanent record
> Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
> 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths
> Calibrated and certified to ± 1% accuracy using a NIST traceable load cell
> Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4642/16276-1,
BS EN 12004-2, AS/NZS 1580.408.5 and others

Product Details:

Erichsen Scratch Hardness Testers 430 P is designed at par with the changing industry trends. Further, we continuously enhance the features of our products to keep apace with our market counterparts.

Features:

• 9 preset cross-cuts in conformance with the most commonly used standards
• 1 freely programmable cross-cut pattern for various applications
• 2 cutting lengths and 2 cutting speeds that can be combined as per the requirements
• Setting for cut distance with step motor precision
• "Stop"-option within the cross hatch cutting mode for changing the test force for the next scratch track of the concerning current cross-cut pattern
• Visual display upon cutting through insulating layers to metal substrate
• Rapid clamping device for test panels with wide clamping range

Additional Information:

• Item Code: 430-P

Product Details:

We are engaged in offering Gel Timer.With GELNORM - Gel Timer it is possible to evaluate all factors which influence the gel time of reaction resins such as type and quantity of hardener, accelerator, inhibitor, filler, pigments, as well as temperature and moisture. The instrument is extremely easy to operate and normally needs no maintenance.

The principle of measurement of GELNORM - Gel Timer is simple: A stamper made from aluminium or glas performs an up-down cycle in a thermostatized test tube filled with resin. When the point of gelation is reached, the test tube is pulled up by the stamper. This stops the clock which was started at the beginning of the experiment and the gel time can be read of.

Product Details:

Thermal imaging is the best non-invasive, non-destructive method for diagnostics of potential problems without damage to property, danger to person, or shut down of process.