Replica Tape Reader to Measure and Record 2D/3D Surface Profile Parameters
Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film™ replica tape.
Create a replica by burnishing tape on a surface and insert into instrument. 3D imagery and 2D/3D parameters are displayed in seconds!
Reports common parameters: Ra, Rq, Rz, Rp, ­Rv, Rt, Rpc (2D), and Sa, Sq, Sz, Sp, Sv, and Spd (3D)
Ideal for field or laboratory use; flat, curved or irregular surfaces Certified and traceable to an accredited national laboratory
Download 3D .SDF image files for analysis in included PosiSoft or third party ­­­software
Certificate of Calibration showing traceability to PTB (for H and HL only) and NPL (for Ra and Rt) included (Long Form)
Conforms to ASME B46, ASTM D4417, ISO 8503-5, NACE SP287, SSPC-PA 17, SSPC-SP5, SP6, SP10, SP11-87T and others

Specifications:

Measuring Range (H) 20 – 115 µm 0.8 – 4.5 mils
Measuring Range (Rt) 10 – 115 µm 0.4 – 4.5 mils
Minimum Roughness (Ra) 2 µm 0.08 mil/80 µin
Accuracy (H) + 5 µm + 0.2 mil
Accuracy (Rt)* + (5 µm + 5%) + (0.2 mil+ 5%)
Accuracy (Ra)* + (0.25 µm + 5%) + (0.01 mil + 5%)
Anvil Pressure 1.1 Newtons 110 grams-force
Anvil Size Ø6.25 mm Ø0.25 inch
Field of View 3.8 x 3.8 mm 0.149 x 0.149 inch
Lateral Sampling 3.7 µm 0.145 mil
Vertical Resolution 100 nm - 2D/3D 10 nm - SDF 3.93 µin - 2D/3D 0.393 µin - SDF
Resolution 0.1 µm 0.01 mil

Barcol Hardness Impressor Measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials such as harder plastics, and fiber-reinforced plastic

• Easy-to-read digital display
• Comparable to 934-1 Barcol Hardness Tester
• NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation
• NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure
• PosiTector interchangeable platform—attach any PosiTector probe to a single gage body
• USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
• Certificate of Calibration included

Conforms to ASTM B648/D2583, DIN EN 59, and AS/NZS 3572.22

Description from Product Brochure :-

CHLORIDE/SULFATE/NITRATE ION TESTS FOR SURFACES

Most specifications do not address sulfates or nitrates because there has never been a sulfate or nitrate field test kit. Now there is a complete test kit available that tests all three salts.

CHLOR*TEST “CSN Salts” offers the specifier the availability of trouble-free performance testings, in the field, for chlorides, sulfates, and nitrates with one extraction.

The CHLOR*TEST “CSN Salts” uses a unique patented extract solution, CHLOR*EXTRACTº, to retrieve surface salt contamination. This special extract enhances retrieval rates, thereby increasing accuracy. The greater the retrieval rate, the more accurate the test results.

 

Surface sampling is simplified by use of the patented CHLOR*SLEEVE® . Sampling can be done overhead, vertically, horizontally or any angle with this device.