Adhesive Testing

Product Details:

The Polyken™ Probe Tack from ChemInstruments makes it easy to measure the tack of pressure sensitive adhesives. A precision ground 5.0 mm diameter flat probe contacts the adhesive, reverses direction and pulls away from the adhesive. The maximum force required to break the adhesive bond is recorded and displayed. The Polyken™ Probe Tack adhesive testing machine meets the standards set forth in ASTM D2979. Machine speed is 24 ipm (61 cm/m), probe diameter is 5 mm and it has an annular ring which applies the standard pressure of 9.79 +/-0.10 kPa. An automatic test cycle produces a 1 second dwell time from the beginning of contact to the end of contact.

Machine Details

• Rugged construction, capable of withstanding the abuse of the production environment
• Digital speed and distance control
• Automated test sequence
• Test Methods – D2979 or custom test methods
• D2979 test method speed is 24 ipm (10 mm/sec) with a 1 second dwell time
• Selectable speed range from 6 to 30 ipm (2 - 12 mm/sec) for custom test methods.  Increment value is 1 ipm or 1 mm/sec.
• Selectable dwell time from 1 to 30 seconds (in increments of 1 second) for custom test methods
• 5 pound load cell is included with the machine (2 and 10 pound load cells are optional)
• Accurate to ± 0.1% of load cell range
• Capable of pulling up to 5 pounds (2.2 Kg)
• Operating temperature range 32° - 150° F (0° - 70° C)
• Capable of stand-alone operation with integrated touch display
• Data can be downloaded to EZ Data software for complete data management
• 5.7 inch touch screen display
• Universal input voltage from 85-265 VAC(50/60Hz)
  
  

Data Acquisition System

• The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, digitally displays it and also stores that data in its memory.
• Samples at 2000Hz, 2 samples are collected, averaged and stored as a data point. A test will generate a data point every 1ms
• Displays a graph of all measured force values upon completion of a test
• Displays the high and low measured force results immediately upon completion of a test
• Export data by USB connection to a local PC with our EZ Data software
• Displays test values in grams, kilograms, ounces, pounds or Newtons

Additional Information:

• Item Code: PT-1000

Product Details:

Product Overview:

• Rugged construction, capable of withstanding the abuse of the production environment
• Advanced digital speed control with stepper motor
• Selectable speeds of 1-24 ipm (3-60 cpm), available in even increments 
• Test angle is permanently set for 90
• 10 pound load cell is included with the machine
• Capable of pulling up to 10 lbs (4.5 kg)
• Test samples as short as 1/2” to as long as 6” (12-150 mm)
• Unique design capable of testing thick samples or setups involving fixtures
• Designed to accept standard 2” x 6” peel panels (50 mm x 150 mm)
• Increments 1.25-11.25 cm/.5-4.5 inches
• Operating temperature range 32°-150° F (0°-70° C)
• Capable of stand-alone operation with integrated digital touchscreen display
• Data can be downloaded to EZ Data software for complete data management
• Universal input voltage from 85-265 VAC (50/60 Hz)
  
  

Data Acquisition System

• The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, digitally displays it, and stores the data in its memory.
• Records 400 HZ, 8 samples are collected, averaged and stored as a data point. A test will generate a data point every 20ms
• Displays the average, high, and low measured force results immediately upon completion of a test
• Export data by USB connection to a local PC with our EZ Data software
• Displays test values in grams, kilograms, ounces, pounds, or Newtons

Product Details:

Quickly and efficiently determine the tack or "grab" of an adhesive with the ChemInstruments Loop Tack Tester. This compact tack testing machine meets PSTC, ASTM and TLMI specifications. Simple to operate, it can be used stand-alone or connected to EZ Data Lab Management software.

Machine Details

• Rugged construction, capable of withstanding the abuse of the production environment
• Digital speed and distance control
• Automated test sequence
• Easy sample setup using a removable grip makes testing quick and consistent
• Capable of performing 5 inch or 7 inch loop tests
• Test Methods – D6195, FTM9, or custom test methods with either 5 or 7 inch loops
• Selectable speed range from 6 to 30 ipm (150 - 762 mm/min) for custom test methods.  Increment value is 1 ipm or 1 mm/min.
• Selectable dwell time from 0 to 30 seconds (in increments of 1 second) for all other test methods
• 10 pound load cell is included with the machine (2 and 5 pound load cells are optional)
• Designed to use 1x3 or 1x6 inch panels up to .25 inch thick
• Accurate to ± 0.1% of load cell range
• Operating temperature range 32° - 150° F (0° - 70° C)
• Capable of stand-alone operation with integrated touch display
• Data can be downloaded to EZ Data software for complete data management
• 5.7 inch touch screen display
• Universal input voltage from 85-265 VAC(50/60Hz)

Data Acquisition System

• The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, digitally displays it and also stores that data in its memory.
• Samples at 400Hz, 8 samples are collected, averaged and stored as a data point. A test will generate a data point every 20ms
• Displays a graph of all measured force values upon completion of a test
• Displays the high and low measured force results immediately upon completion of a test
• Export data by USB connection to a local PC with our EZ Data software
• Displays test values in grams, kilograms, ounces, pounds or Newtons

Product Details:

The most versatile peel tester on the market, the ChemInstruments AR-2000 Adhesion Peel & Release testing machine with 5.7" touch screen is designed to perform PSTC, ASTM, TLMI, FINAT, and AFERA adhesion and release testing procedures. With it's ease of operation, reliability, simplicity, and affordable price, the AR-2000 has quickly become the standard in many plants and laboratories throughout the world. Coupled with our EZ Data Lab Management software, it is an integral part of any R&D or QC laboratory.

Product Overview

• Rugged construction, capable of withstanding the abuse of the production environment
• Digital speed control
• Selectable speed range from 1 to 1200 ipm (3-3048 cpm)
• Test angle is selectable between 90° and 180°
• One load cell is included with the machine (2, 5, 10, or 20 pound capacities available)
• Capable of pulling up to 20 lb (9 kg) (dependent on selected lower speeds)

• Accurate to +/-0.1% of load cell range
• Test samples as short as 1/2” to as long as 12” (12-305 mm)
• Operating temperature range: 32°-150° F (0°-70° C)
• Capable of stand-alone operation with integrated touch screen display
• Data can be downloaded to EZ Data software for complete data management
• 5.7 inch touch screen display
• Standard input voltage – 120 VAC (60 Hz)

 

Data Acquisition System

 

• The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, displays it, and stores the data in its memory.

• Samples at 400Hz, 8 samples are collected, averaged and stored as a data point. A test will generate a data point every 20ms

• Displays graph of all measured force valves upon completion of a test

• Displays the average, high, and low measured force results immediately upon completion of a test

• Export data by USB connection to a local PC with our EZ-Data software

• Displays test values in grams, kilograms, ounces, pounds, or Newtons

Specifications

• Height: 24” (61 cm)
• Width: 36” (91 cm)
• Depth: 13” (33 cm)
• Weight: 92 lbs (42 kg)

 

 

 

 

Product Details:

Compact enough for a laboratory bench top, but durable enough for production, the Hot Roll Laminator can consistently reproduce hot laminate product samples that are ready for testing or small-scale production. With flexible controls, the Hot Roll Laminator allows for a wide range of materials to be laminated including papers, films, foils and many other materials. The heated laminating system is designed to be very versatile and can be modified for a multitude of variations.

Standard Specifications

• Rugged construction, capable of withstanding the abuse of the production environment
• Produce laminated samples of unlimited length up to 18" (45 cm) in width
• Variable speed motor allows the following laminating speeds:
• Top and bottom rolls are 4" (10 cm) diameter by 18 1/2" (47 cm) face width
• Top roll is heated by a 1500-watt heating rod inserted through the full width of the roll axis
• Capable of maintaining temperatures up to 400°F (204°C)
• J-type thermocouple is an integral part of the heating rod
• Heating rod designed with a 35-30-35 heating profile to more evenly distribute heat across width
• Roll temperature is accurately maintained by a digital PID controller
• Controller is capable of maintaining temperatures to a tolerance of ± 2°F (1°C)
• Choose top roll material from: Aluminum, Hard coat anodized with Teflon coating, Steel, chrome plated and precision ground to 8 RMS
• Bottom roll material is aluminum and covered with 80 durometer silicone rubber
• Bottom roll is driven, top roll idles
• Digital speed control with improved stepper motor technology
• Requires compressed air - max pressure 90 PSI (6 bar)
• Air pressure is adjustable for differing levels of laminating pressure
• Laminating pressure (LP) can be approximated using the following formula: LP = (6.28 x line pressure) / sample width
• Flow controls are included on both laminator cylinders to allow for smooth, safe operation
• Unwind stand is capable of holding roll stock up to 12" (30 cm) diameter by 18" wide (45 cm)
• Length of lamination can be measured
• Digital controls to control speed, unit of measure and jog functions
• Operating temperature range 32 – 122 °F (0-50°C)
• Standard input voltage - 120 VAC (50/60 Hz)
• 2 – 300 IPM, 0.1 IPM increments from 2-12 IPM, 0.5 IPM increments from 12-200 IPM
• 5 – 750 CPM, 0.25 CPM increments from 5-30CIPM, 1.25 CPM increments from 30-750 CPM

 

 

Accessories

• Gap adjustment
• 3" core chuck with friction brake
• Dual unwind
• Manual windup station
• Release paper (roll)
• Polyester (roll)

 

Specifications

• Height: 30" (76 cm)
• Width: 39" (99 cm)
• Depth: 20" (51 cm)
• Weight: Aluminum roll 160 lbs (73 Kg) and Steel roll 185 lbs (84 Kg)

 

 

 

Product Details:

Combining our proven SS-HT-8 Shear Adhesion tester with our S-O-8 Shear Oven in one convenient package is the SS-OSI-8 Integrated 8 Bank Shear and Oven. The timer module is built into the face plate for ease of use and convenience. The oven thermocouple is directly accessed by the timer module for complete integration.

Shear Stand

• Rugged construction, capable of withstanding the abuse of the production environment
• Two component design allows the switch unit to be separated from the timer control box
• High temperature, 8' long (2.5m) cable interfaces the two components
• Designed to use standard, 2" x 3" (50mm x 75mm) format, test panels
• Capable of holding panels of various thicknesses, up to 1/4" (6mm)
• Mechanical switches can be calibrated to trip when using weights from 100 to 1,000 grams
• Adjustable feet allow the user to level the testing plane
• Panel rack is marked for the standard 178° back tilt, as specified by most shear test methods
• Adjustable angle panel rack allows the user to easily change the test angle from 178° to 90°
• Shear stand operating temperature range 20° - 400° F (-6° - 204° C)
• Shears are designed to be used with weights from 100gr to 1000gr
• Any weight which is larger than the 1000gr requires the S-EXT(Shear Extension) accessory
• The largest weight that can be safely used with the shear stand is 3000gr

 

Oven

• 3 pattern, 30 step programmable controller, capable of performing SAFT ramped temperature testing
• Controller is capable of maintaining up to 10 different programs
• Maximum oven operating temperature of 500°F (260°C)
• Temperature control accuracy of oven ± 0.5°F at 410°F (1°C at 210°C)
• Temperature distribution accuracy of oven ± 1.5°F at 500°F (2.8°C at 260°C)
• Oven is capable of achieving a temperature rise of 2°F (1°C) per minute (dependent on thermal mass)
• The switch unit of the 8 Bank Shear fills approximately 50% of the interior volume in the oven
• Stainless steel interior construction of the oven
• Forced-air circulation type oven (convection)
• Vent hole in oven for accessory access
• Oven includes 2 stainless steel shelves with 12 possible positions
• Viewing window in the door
• Easy-open oven door latch minimizes disruption of testing
• Over-temperature protection and other safety features designed into oven electronics
• Standard oven input voltage of 220 VAC (50/60 Hz)
• Timer controls are mounted and wired permanently into the face

Product Details:

Machine Details

• Rugged construction, capable of withstanding the abuse of the production environment
• Digital speed and distance control
• Maximum testing span is 32 inches (820 mm) minus the length of the grips
• Throat distance from centerline of grip to mast face is 3.5 inches (89 mm)
• Return position accuracy is +/-0.005” (0.125 mm) per test cycle
• Grips not included, but optionally available
• Selectable speed range from 0.1 to 25 ipm (0.1 ipm increments) or 0.25 to 62.5 cpm (0.25 cpm increments)
• Capable of pulling up to 200 lbs (90 kg)
• One load cell is included with the machine (5, 10, 20, 50, 100, or 200 lb capacities available)
• Accurate to ± 0.1% of load cell range
• Operating temperature range 32° - 150° F (0° - 70° C)
• Capable of stand-alone operation with integrated touch display
• Data can be downloaded to EZ Data software for complete data management
• 5.7 inch touch screen display
• Universal input voltage from 85-265 VAC(50/60Hz)

Data Acquisition System

• The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, digitally displays it and also stores that data in its memory.
• Samples at 400Hz, 8 samples are collected, averaged and stored as a data point. A test will generate a data point every 20ms
• Displays a graph of all measured force values upon completion of a test
• Displays the average, high and low measured force results immediately upon completion of a test
• Export data by USB connection to a local PC with our EZ Data software
• Displays test values in grams, kilograms, ounces, pounds or Newtons

Product Details:

Perform one-step testing for static and kinetic coefficient of friction values with the ChemInstruments Coefficient of Friction tester. Easy to setup and use, this test platform provides automatically calculated results at the completion of each test. The Coefficient of Friction tester meets or exceeds numerous test methods, including ASTM D1894.

Machine Details

• Rugged construction, capable of withstanding the abuse of the production environment
• Advanced digital speed control with  stepper motor
• Selectable speeds of 1-24 ipm (3-60 cpm), available in even increments
• Static and kinetic COF results displayed immediately upon test completion
• 5 lb load cell is included with the machine
• Test samples as short as 1/2” to as long as 6” (12-150 mm)
• 2.5” (6 cm) square, rubber covered, 200 gram sled is included with the machine
• Custom sleds available up to 2000 grams
• Quick and easy setup and operation for reliable results
• Capable of stand-alone operation with integrated digital display
• Data can be downloaded to EZ Data software for complete data management
• Capable of pulling up to 10 lbs (4.5 kg)
• Operating temperature range 32° - 150° F (0° - 70° C)
• Universal input voltage from 85-265 VAC (50/60 Hz)

Data Acquisition System

• The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, digitally displays it and also stores that data in its memory.
• Samples at 400Hz, 8 samples are collected, averaged and stored as a data point. A test will generate a data point every 20ms
• Displays a graph of all measured force values upon completion of a test
• Displays the average, high and low measured force results immediately upon completion of a test
• Export data by USB connection to a local PC with our EZ Data software
• Displays test values in grams, kilograms, ounces, pounds or Newtons

Product Details:

Get precision measurements for 180° peel tests with the ChemInstruments 180° peel adhesive testing machine. The 180° peel adhesive tester runs at varying speeds for added flexibility and offers a number of additional features.

Product Overview

• Rugged construction, capable of withstanding the abuse of the production environment
• Advanced digital speed control with stepper motor
• Selectable speeds of 1-24 ipm (3-60 cpm)
• Test angle is permanently set for 180° testing
• 10 pound load cell is included with the machine
• Capable of pulling up to 10 lbs (4.5 kg)
• Test samples as short as 1/2” to as long as 6” (12-150 mm)
• Designed to accept standard 2” x 6” peel panels (50 mm x 150 mm)
• Increments of 1.25 - 11.25 cm / .5-4.5 in.
• Operating temperature range 32°-122° F (0°-50° C)
• Capable of stand-alone operation with integrated digital touchscreen display
• Data can be downloaded to EZ Data software for complete data management
• Universal input voltage from 85-265 VAC (50/60 Hz)

Data Acquisition System

 

• The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, digitally displays it, and stores the data in its memory.
• Records 400HZ, 8 samples are collected, averaged and stored as a data point. A test will generate a data point every 20ms
• Displays the average, high, and low measured force results immediately upon completion of a test
• Export data by USB connection to a local PC with our EZ Data software
• Displays test values in grams, kilograms, ounces, pounds, or Newtons

Data Acquisition System

• The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, digitally displays it, and stores the data in its memory.
• Records 400HZ, 8 samples are collected, averaged and stored as a data point. A test will generate a data point every 20ms
• Displays the average, high, and low measured force results immediately upon completion of a test
• Export data by USB connection to a local PC with our EZ Data software
• Displays test values in grams, kilograms, ounces, pounds, or Newtons

 

Product Details:

Motorized Wire Wound Rod Drawdown Coaters are precision sample preparation machines. They are designed to provide both large and small laboratories with an affordable tool to make consistent and repeatable coated samples. The lab coater features a coating bed that uses a sheet of float plate glass to provide consistently flat and smooth coatings. Simple swing arm design and rod loading slots makes this machine easy to use and cleanup a snap. Additionally, foam sheets are provided to accommodate various coating needs. The EC-200 Variable Speed Drawdown Coater provides machine-controlled preparation of laboratory samples for adhesive, coating, ink and sealant testing. It's simple operation and adjustable speed makes it the perfect shop floor tool to create consistent samples, as well as greatly reducing the "human" interface for improved repeatability.

Product Overview

• Rugged construction, capable of withstanding the abuse of the production environment
• Selectable speed range from 15 to 450 ipm (38 - 1143 cpm)
• Coating area is 12" wide x 13 1/2" long (30 cm x 34 cm)
• Coating load weight is 600 grams
• Wire Wound Rod size is 1/2" diameter x 16" long (1.3 cm x 41 cm) with 12 1/2" (32 cm) coating width
• Wire Wound Coating Rods not included, but a wide range of wire sizes are available
• Operating temperature range 32° - 150° F (0° - 70° C)
• Universal input voltage from 85-265 VAC (50/60 Hz)

Specifications

• Height:   7" (18 cm)
• Width:   15" (38 cm)
• Depth:   22" (56 cm)
• Weight:  30 lbs (13 Kg)

Product Details:

Compact and simple to operate, the Benchtop Laboratory Laminator is durable enough for laboratory or production use. Day after day, the LL-100 Benchtop Laboratory Laminator can consistently reproduce laminated samples that are ready for testing. The simple controls allow for quick work and can accommodate a wide range of materials to be laminated including papers, films, foils, and many other materials. This laminating system is very versatile and is one of a handful of devices that are a must for any development or QC laboratory.

Product Overview

• Rugged construction, capable of withstanding the abuse of the production environment
• Produce laminated samples of unlimited length up to 23" (58 cm) in width
• Top and bottom rolls are 2" (5 cm) diameter by 24" (61 cm) face width 
• Top and bottom rolls have a steel core and are covered with 80 durometer silicone rubber
• Bottom roll is driven, top roll idles
• Requires compressed air - max pressure 90 PSI (6 bar)
• Air pressure is adjustable for differing levels of laminating pressure
• Laminating pressure (LP) can be approximated using the following formula: LP = (3.4 x line pressure) / sample width
• Flow controls are included on both laminator cylinders to allow for smooth, safe operation
• Safety features include appropriate guarding and an emergency stop switch
• Universal input voltage from 85-265 VAC (50/60 Hz)
• Operating temperature range 32° - 150° F (0° - 70° C)
• Length of lamination can be measured
• Digital controls to control speed, unit of measure and jog functions
• Variable speed motor allows laminating speeds from 1.0-12.5 fpm (30-375 cm/m)

Accessories

• Manual windup station
• Gap adjustment
• Unwind Stand
• 3" core chuck with friction brake 
• Release paper (roll)
• Polyester (roll)

Options

• Various alternative materials or finishes for both rolls
• Custom modifications available on request
• PSTC and TLMI testing manuals and videos

Specifications

• Height: 18" (46 cm)
• Width: 40" (102 cm)
• Depth: 11" (28 cm)
• Weight: 64 lbs (29 Kg)

Product Details:

Easily mount this fixture to the lower grip of any Tensile / Compression device. It allows you to perform Tape Unwind force tests to PSTC / ASTM standards. Designed to use with tape rolls supplied on 3" cores with up to an outer diameter of 6". Use this device to quickly test tape unwind forces. This fixture is made of aluminum and Teflon coated for ease of cleaning and maintenance.

Product OverviewFixture for our Tensile Tester that will allow you to perform Unwind tests. Designed for 3 inch diameter cores and can accept up to a 3 1/4 inch outside diameter of the roll.

Product Details:

Quickly and accurately measure the burst strength of die cut label stock with the Burst/Perforation testing machine. The burst strength tester meets the standards specified in TLMI Test L-1G for die cut burst ratio. The included EZ Data software makes data acquisition and data management easier and provides more powerful analysis capabilities.

Machine Details

• Rugged construction, capable of withstanding the abuse of the production environment
• Digital speed control with encoder feedback
• Selectable speed range from 0.5 to 25 IPM in 0.5 IPM increments (1-64 CPM, 1 CPM increments)
• Designed specifically to perform the TLMI L-1G test method for die cut burst ratio
• Selectable test lengths from 0.25 to 1.5 inches  in 0.25 inch increments (0.5 – 3.5 centimeters, 0.5 centimeter increments)
• 25 pound load cell is included with the machine
• Capable of pulling up to 50 pounds (22 kg)
• Accurate to +/-0.1% of load cell range
• Operating temperature range: 32°-150° F (0°-70° C)
• Capable of stand-alone operation with integrated 5.7 inch touch screen display
• Data can be downloaded to EZ Data software for complete data management via USB connection
• Universal input voltage from 85-265 VAC(50/60Hz)

Data Acquisition System

• The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, digitally displays it, stores the data in its memory, and interfaces with EZ Data management software to show the results graphically.
• Records 1,000-5,000 data points per second during a test interval based on selected test speed
• Displays a graph of all measured force values upon completion of a test
• Displays the average, high, and low measured force results immediately upon completion of a test
• Export data by USB connection to a local PC with our EZ Data software
• Displays test values in grams, kilograms, ounces, pounds, or Newtons