KERSHAW Tackmaster-07 is a durable tester that is specifically designed to accurately test ink tack. the tester is simple in design, requires minimal maintenance, and will prove IDENTICAL results as your existing Inkometer, this testing machine has application in both the laboratory and the work place
|Dimensions Handheld||185 (H) x 90 (W) x 48 (D)mm|
|Detectable Particle Size||0.5 Micrometer - 100 Micrometer|
|Dimension||14.5 " x 9.5 " x 6"; weight 15 lb|
|Typical Bottle Size||15-60 mm inside diameter|
|Bottle Material||Transparent, scratch-free glass|
|Power||115v 60Hz AC, 12v car jack or internal battery(|
|Wide Speed range of||0-500 mm./ Sec|
|Electrical Power Source||110-240 V;50/60 Hz|
|Overall Dimensions||570x370x140 mm|
Automatic Motorised Film Applicator
The TQC Motorised Automatic film applicator or drawdown machine provides a reliable basis to apply coating films and slurries to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors. Variations in speed, pressure and direction of draw down cause irregularities. Other factors that may influence the result are the shear rate and the weight of the applicator. With the TQC Automatic film applicator these variable factors are being stabilised. Over the complete surface the film thickness is even.
To prepare samples for testing rheological properties, abrasion resistance, hiding power and gloss the TQC Motorised Automatic film applicator is a must have. Motorised Film Applicators are also used in the adhesives industry.
Drying time recorder option
An optional drying time recording tool is available to convert the TQC automatic film applicator into a drying time recorder. The time range of the drying time recorder can be set digitally from 1 minute to 48 hours. The tool can be installed without any tools and can measure up to 8 channels in one run.
Heated Vacuum bed
The product is also available with an electrically heated vacuumbed. The temperature can be set digitally from ambient +5°C to ambient + 100°C . Heat-up time is short and temperature is uniform over the entire bed.
Multiple types of automatic film applicators are available for either glass/paper/metal substrates or foils. All models can be used in combination with standard block type film applicators such as bird/baker models,sagging and levelling testers or spiral bar type film applicators (wire wound rod type).
|Power Supply||220 V, AC 50Hh|
|Loading Range||1.75-6.0 Kg|
|Adjustable Speed||10-100 mm|
|Scraper Angle||85 Degree|
|Measuring Range||25 to 2000 um|
|Model Name / Number||WG-2|
|Dimension||113.5 mm x 54 mm x 27 mm|
|Basic Critical Thickness||0.5 mm,0.3 mm|
|Diameter||3 mm,5 mm|
Wet Film Thickness Gauge S.S.
The TQC Wet Film Thickness Gauge WG is a hexagonal/octagonal precision measuring comb made of heavy stainless steel. The high-grade stainless steel will not be affected by acid or base elements. Models available for several different applications.
Art. No. SP4000
TQC Wet Film Thickness Gauge WG-1 20-370 µm in 24 steps (6x4) for decorative paints and primers.
Art. No. SP4010
TQC Wet Film Thickness Gauge WG-2 25-2000 µm in 36 steps (6x6) With edge radius check (2mm) for protective coatings and high solids.
Art. No. SP4020
TQC Wet Film Thickness Gauge WG-3 50-10000 µm in 72 steps (8x9) for extremely thick films such as floor coatings, fillers, fire proofing, plaster, adhesives etc.
Art. No. SP4050
TQC Wet Film Thickness Gauge 1-80 mils in 36 steps (6x6) With edge radius check (2mm) for protective coatings and high solids.
TQC INOX High Precision Wet Film Thickness Gauge 4-60 mils in 16 steps (4x4)
Art. No. SP4060
|Capacity||800 Points Record|
Curve X3 Basic Data Logger
The CurveX 3 Basic is an oven recorder designed for everyday use in powder coating lines.
It’s a 4-channel temperature datalogger built in a sturdy machined aluminium case that fulfils the basic needs for quality control in powder coating applications. Its ease of use and affordable price level makes it the ideal job-coaters instrument.
To use a CurveX 3 Basic to the fullest an insulation box, heat absorber/bracket and probes are necessary. All CurveX insulation boxes and CurveX probes, and the single heat absorber / bracket can be used with the CurveX 3 Basic. See the accessory list
CurveX 3 Basic features• Operate through only 3 large buttons
The AS 100 fluidimeter has been designed for the specific purpose of determining the spray properties of powder paints. In the electrostatic powder coating process, the powder paint is carried then sprayed on the item by suspension in air. However, paints in powder form react very differently to this suspension in air according to their grain size, degree of humidity, formula, etc.
The fluidimeter determines this behaviour and indicates immediately whether a powder paint is suitable for spraying purposes. It is a valuable aid in product quality control for both powder paint manufacturers and user laboratories.
The apparatus comprises :
A - A 100 mm diameter cylinder with a porous base in which the powder is fluidized, and with a calibrated side opening for the powder to flow through.
B - A container to collect the powder flowing through the cylinder opening.
C - A control box containing :
|Brand||Engineer office for applied spectroscopy|
|Board Size (Inches)||25" x 30"|
|Magnification||5x-200x @17" monitor Full Screen View|
|Optical Format||1/3" CMOS Sensor (4,3)|
|Output||USB Streaming video|
|Video Capture Resolution||1600x1200,1280x960,640x480|
|Lens||High Precision Microscope Lens|
Imported Digital USB Microscope and Video Camera
• Inspection and quality control
• Printing and textile Inspection
•Teaching and research tool
• Medical analysis tool
• Anyview Digital Microscope
• Calibration Ruler
• 2x transparent stand spacers
• Quick Instrument guide
• CD Including software: Measure and calibration functions.
• CPU Pentium/Celeron/AMD 1.0G or above
• Window XP SP2/Vista or 7 and Mac OS
• Available USB 2.0 or 1.1 Port
• VGA Card: 16bit or above
• CD-ROM drive.
|Voltage||220V / 50Hz|
The Hoover Automatic Muller M-5 was developed to provide a simple way to make a small pigment- resin dispersion for color evaluations.
The Hoover Automatic Muller provides a quick and easy method for preparing a small sample of pigment-resin dispersion. The glass plates that shear the pigment into the resin are easily cleaned by the solvent used in solubilizing the resin. This piece of equipment has been utilized for decades in the quality control of pigment production; it continues to find new uses wherever incoming pigment quality is a concern.
Reviewed by 42 Users
Most Relevant Reviews